Vicks PS-3K, PS-0K, PS-1K General information, Following should be principally observed

Page 8

R

General information

1 General information

1.1 The following should be principally observed ...

With this Stud Welding Pistol you have purchased a product which

•corresponds to the latest state-of-the-art in technology

•complies fully to the present-day safety standards and

•enables successful operating.

Please observe the following points in any case before installing the Stud

Welding Pistol:

•Store the Operating Instructions in a place to which every Operator has access.

•Ensure that the respective Operator has read and understood the Operating Instructions before installation. Each Operator should sign a written confirmation to certify this.

•Prevent use of Stud Welder by unauthorised personnel.

•An electronics technician should check whether the electric supply is properly protected by fuse and earthed.

•Only trained personnel may use the Stud Welding Pistol.

MORTAL DANGER

Persons with cardiac pacemakers must not operate the Stud Welder and must keep away from a Stud Welder during operation. Ensure in particular that the Stud Welding System is not operated near electronically sensitive life-saving equipment, as in intensive wards in hospitals.

WARNING

Ensure that sufficient distance to electronic equipment is kept. Highly intensive electro-magnetic fields are created in stud welding which may permanently damage these devices (e.g. television sets).

•Furthermore, observe the safety instructions stated in Chapter 3.

•Call a doctor in the event of an accident.

MORTAL DANGER

The S-symbol is the symbol for welding current sources permitted

for operation with increased electric danger. The S-symbol on our stud welders refers exclusively to the welding current circuit and not to the complete stud welder.

1-1

Image 8

Contents PS-3K PS-0K PS-1K PS-3K PS-0K PS-1K GmbH Page Table of Contents Setting the Stud Welding Pistol MaintenanceInitiation Quality controlSpare parts General information Following should be principally observedIntended use Information on the documentation Chapters of Operating InstructionsInformation on Operating Instructions Reaction in the case of malfunctionsDescription of the Stud Welding Pistols Technology of tip ignitionStud Welding Pistol PS-1 Stud Welding Pistol PS-3K PS OM Stud Welding Pistol PS-0KStud Welding Pistol PS-1K Technical data PS-1 PS-3K PS-0K PS-1KSafety instructions Characterisation of references in the Operating InstructionsSafety-conscious working Staff qualification and trainingSafety instructions for the User/Operator Following should be observed prior to initiationSafety measures at the installation site Before starting welding operationsWorking with the Stud Welder Independent retrofitting and spare parts productionNon-permissible operating modes Setting the Stud Welding Pistol Setting the Stud HolderInstalling the stud holder in the Stud Welding Pistol Setting the spring pressure Spring pressureInitiation General viewConnecting the Stud Welding Pistols to the Stud Welder OperationStud Welder BMS-690-135 Welding parametersStud Welder BMS-660-90 Stud Welder BMS-6H Stud Welder BMS-8HType and scope of testing Quality ControlGeneral information Demands on the companyImplementation of sample taking Normal work testSimplified work test Production of samplesTension test Bending testReplacing components MaintenanceStud Welding Pistols Spare parts list for Stud Welding Pistol PS-1 Spare partsPerspective presentation of Stud Welding Pistol PS-1 Spare parts list for Stud Welding Pistol PS-3K Perspective presentation of Stud Welding Pistol PS-3K Spare parts list for Stud Welding Pistol PS-0K Perspective presentation of Stud Welding Pistol PS-0K Spare parts list for Stud Welding Pistol PS-1K Perspective presentation of Stud Welding Pistol PS-1K Troubleshooting Functional breakdowns Warranty Terms Standards and List of DirectivesHeinz Soyer Bolzenschweißtechnik GmbH