Vicks PS-3K, PS-0K, PS-1K operating instructions GmbH

Page 3

R

	SOYER is a registered trademark of Heinz Soyer Bolzenschweißtechnik
	GmbH.
	It is prohibited to convey or reproduce this document, as well as to utilise or disclose its contents, unless this has
	been explicitly authorised.
	In the event of noncompliance with this regulation, damages will be charged. All rights reserved, in particular in the
	event of patent grant or GM registration.
	This is to certify that we have verified the contents of this publication which comply with the hard- and software
	described. Deviations, however, cannot be excluded, so that we cannot warrant for absolute compliance. The
	specifications in this documentation have been verified regularly and necessary corrections incorporated into the
	following versions. We appreciate any suggestions for improvement.
Date of issue: Dec. 1, 1994	 Heinz Soyer Bolzenschweißtechnik GmbH 1994 · All rights reserved

	Subject to technical modifications.
	Printed in the Federal Republic of Germany.

Image 3

Contents PS-3K PS-0K PS-1K PS-3K PS-0K PS-1K GmbH Page Table of Contents Quality control Setting the Stud Welding PistolMaintenance InitiationSpare parts Following should be principally observed General informationIntended use Chapters of Operating Instructions Information on the documentationReaction in the case of malfunctions Information on Operating InstructionsTechnology of tip ignition Description of the Stud Welding PistolsStud Welding Pistol PS-1 Stud Welding Pistol PS-3K Stud Welding Pistol PS-0K PS OMStud Welding Pistol PS-1K PS-1 PS-3K PS-0K PS-1K Technical dataCharacterisation of references in the Operating Instructions Safety instructionsStaff qualification and training Safety-conscious workingFollowing should be observed prior to initiation Safety instructions for the User/OperatorBefore starting welding operations Safety measures at the installation siteIndependent retrofitting and spare parts production Working with the Stud WelderNon-permissible operating modes Setting the Stud Holder Setting the Stud Welding PistolInstalling the stud holder in the Stud Welding Pistol Spring pressure Setting the spring pressureGeneral view InitiationOperation Connecting the Stud Welding Pistols to the Stud WelderWelding parameters Stud Welder BMS-660-90Stud Welder BMS-690-135 Stud Welder BMS-8H Stud Welder BMS-6HDemands on the company Type and scope of testingQuality Control General informationProduction of samples Implementation of sample takingNormal work test Simplified work testBending test Tension testMaintenance Stud Welding PistolsReplacing components Spare parts Spare parts list for Stud Welding Pistol PS-1Perspective presentation of Stud Welding Pistol PS-1 Spare parts list for Stud Welding Pistol PS-3K Perspective presentation of Stud Welding Pistol PS-3K Spare parts list for Stud Welding Pistol PS-0K Perspective presentation of Stud Welding Pistol PS-0K Spare parts list for Stud Welding Pistol PS-1K Perspective presentation of Stud Welding Pistol PS-1K Troubleshooting Functional breakdowns Standards and List of Directives Warranty TermsHeinz Soyer Bolzenschweißtechnik GmbH