Vicks PS-1K Safety instructions, Characterisation of references in the Operating Instructions

Page 18

R

Safety instructions

3 Safety instructions

These Operating Instructions contain fundamental instructions which have to be observed in installation and/or operation. These Operating Instructions therefore have to be read by the Operator and the responsible technical personnel prior to assembly and initiation. They must furthermore be constantly available at the installation site.

Not only the general “Safety Instructions” listed under this main item, but also the special safety instructions e.g. for high temperatures, voltages etc. stated under other main items have to be observed.

3.1Characterisation of references in the Operating Instructions

The safety instructions which may cause damage to persons in the case of non-observance, are specially characterised with the general danger symbol,

safety instructions in accordance with DIN 4844-W9,

warning of electric voltage with the

safety symbol in accordance with DIN 4844-W8.

3-11

Image 18

Contents PS-3K PS-0K PS-1K PS-3K PS-0K PS-1K GmbH Page Table of Contents Initiation Setting the Stud Welding PistolMaintenance Quality controlSpare parts General information Following should be principally observedIntended use Information on the documentation Chapters of Operating InstructionsInformation on Operating Instructions Reaction in the case of malfunctionsDescription of the Stud Welding Pistols Technology of tip ignitionStud Welding Pistol PS-1 Stud Welding Pistol PS-3K PS OM Stud Welding Pistol PS-0KStud Welding Pistol PS-1K Technical data PS-1 PS-3K PS-0K PS-1KSafety instructions Characterisation of references in the Operating InstructionsSafety-conscious working Staff qualification and trainingSafety instructions for the User/Operator Following should be observed prior to initiationSafety measures at the installation site Before starting welding operationsWorking with the Stud Welder Independent retrofitting and spare parts productionNon-permissible operating modes Setting the Stud Welding Pistol Setting the Stud HolderInstalling the stud holder in the Stud Welding Pistol Setting the spring pressure Spring pressureInitiation General viewConnecting the Stud Welding Pistols to the Stud Welder OperationWelding parameters Stud Welder BMS-660-90Stud Welder BMS-690-135 Stud Welder BMS-6H Stud Welder BMS-8HGeneral information Type and scope of testingQuality Control Demands on the companySimplified work test Implementation of sample takingNormal work test Production of samplesTension test Bending testMaintenance Stud Welding PistolsReplacing components Spare parts list for Stud Welding Pistol PS-1 Spare partsPerspective presentation of Stud Welding Pistol PS-1 Spare parts list for Stud Welding Pistol PS-3K Perspective presentation of Stud Welding Pistol PS-3K Spare parts list for Stud Welding Pistol PS-0K Perspective presentation of Stud Welding Pistol PS-0K Spare parts list for Stud Welding Pistol PS-1K Perspective presentation of Stud Welding Pistol PS-1K Troubleshooting Functional breakdowns Warranty Terms Standards and List of DirectivesHeinz Soyer Bolzenschweißtechnik GmbH