FEIN Power Tools FMM 250Q manual Intended use of the power tool, Symbols

3 41 01 091 21 0.book Seite 8 Dienstag, 24. Juli 2007 3:32 15

EN MULTIMASTER FMM 250 / MULTIMASTER FMM 250 Q

Intended use of the power tool.

This power tool is intended for commercial or private use for dry sanding of small sur- faces, corners and edges, for scraping, for sawing thin steel sheet, wood and plastic components using the application tools and accessories recommended by FEIN.

With the respective accessories, the power tool can also be used for polishing, cutting, separating and as a rasp.

Operation of the power tool off power generators.

Operate the power tool only off a.c. generators with sufficient power

output that do not have any distortion of the voltage curve.

WARNING Operating the power tool off power generators

whose no-load speed exceeds the voltage value on the type plate of the power tool is prohibited.

Symbols.

Symbol	Term, meaning	Explanation
➤	Action	Action to be taken by the user
	Do not touch the saw	Danger of sharp application tools moving
	blade.	back and forth.
	General mandatory sign	Follow the instructions in the adjacent text!
	Read documentation	Be absolutely sure to read the enclosed
		documentation such as the Instruction
		Manual and the General Safety Instructions.
	Use eye-protection	Use eye-protection during operation.
	Wear ear protection	Use ear protection during operation.
	Use dust mask	Use a dust mask during operation.
	Use protective gloves	Use protective gloves during operation.
	It is forbidden to dispose	Worn out power tools and other electro-
	of the product in the	technical and electrical products should be
	unsorted household	sorted separately for environment-friendly
	waste.	recycling.
	This symbol confirms the certification of this product for the USA and
	Canada.

8