Kyocera TASKalfa 5500i/TASKalfa 4500i Setting the Finishing Edge, Custom Finishing Edge Settings

Page 57

Finishing

A4 and A3 (210 x 297 mm and 297 x 420 mm)

B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm)

Letter and Legal (8.5 x 11 in. and 8.5 x 14 in.)

Letter and Ledger (8.5 x 11 in. and 11 x 17 in.)

16K and 8K (197 x 273 mm and 273 x 394 mm)

Setting the Finishing Edge

1

2

3

4

5

6

7

You can align the matching sides of two different page sizes in a document.

In the Basic tab, set Print size and Page size to the same size.

In Basic > Source, select an Auto source.

In the Finishing tab, select Finishing edge.

Select from available Position options, or select Custom. Positions are based on the Print size selection in the Basic tab.

Click OK in all driver dialog boxes.

Load each paper size into different paper cassettes. For example, load A4 and A3 paper so that both sizes feed the 297 mm edge or load letter and legal paper so that both sizes feed the 8.5 inch edge.

Click OK in the application’s Print dialog box.

If the printer driver determines that the specified paper size or direction (short or long edge) is unavailable in the printing system, the operation panel message requests that you load the correct paper size into the cassette with the correct orientation.

Positioning Options for Finishing Edge

You can select from available options to specify the page edges to be aligned and finished. For additional position settings, select Custom, then click Settings. Available options for Position depend on Print size, Orientation, Booklet, and Multiple pages per sheet selections.

In the side panel display, the page image shows a blue highlighted strip to indicate the current selected Finishing edge with Staple positions, if selected. When the Staple option is used, the Position selection determines where staples are placed. Use this image to verify your selections for Finishing edge and Staple.

Custom Finishing Edge Settings

The illustrations in the Custom Finishing Edge Settings dialog box help you visualize the page alignments. Select the one setting that best illustrates the edge of the mixed pages you want to align.

To select Custom for Position, click Settings. In the Custom Finishing Edge Settings dialog box, select one of the settings. The illustrations in the dialog box help you visualize the page alignments.

In the Custom Finishing Edge Settings dialog box:

KX DRIVER

6-4

Image 57

Contents Page Models supported by the KX printer driver Table of Contents Chapter Quick Print Chapter BasicChapter Layout Chapter Imaging Chapter FinishingChapter Publishing Chapter JobAdvanced Installation Preparing to Install the DriverSelecting an Installation Method Express Installation Installing UtilitiesInstalling in Express Mode Upgrading Driver ComponentsEnable Status Monitor On the Installation Method page, click Express ModeDevice Settings Print a testOn the Installation Method page, select Custom Mode Custom InstallationPrint a test Print a test Print a test On the Installation Method page, select Custom Mode Installing a Printer Driver in Windows 7 and Windows Vista Installing Optional Printer ComponentsOptional Printer Components Add Printer WizardInstalling a Printer Driver in Windows XP Printer Driver Settings AccessChanging the Default Driver Settings Click Start and Printers and Faxes Click Add a printerClick Printing Preferences Accessing Device Settings Device Options Device SettingsSetting Device Options Setting Punch OptionsSetting up Custom Boxes NoneHole Enabling Auto Configuration Auto ConfigureSilent Auto Configuration MemorySetting the Memory Administrator SettingsGeneral Show Quick Print TabSetting the Administrator Password Password Protect Administrator SettingsClearing the Administrator Password Send Application NameSNMPv3 Options Selecting Snmp SettingsLock Settings Options Lock SettingsUser Login Options User LoginValidate user name computer or prompt for login user name Printing with User LoginLogin User Name Use specific name Prompt for nameJob Accounting Job Accounting OptionsPrinting with Job Accounting Setting User Identification User SettingsIdentification UnitsPDL Page Description Language Setting Language PreferenceLanguage Preference PDL OptionsPCL XL Settings or Kpdl Settings PDL SettingsPCL XL Settings Kpdl SettingsSecurity Settings Selecting a PDLEmbed fonts Compress data Security Print and save Print and Save Settings Click Settings Compatibility SettingsSetting Media Sources XPS DriverCombine Source and Media Type Lists Ignore Application CollationSelecting Printer Driver Collation Creating a Combined Source ListRemoving a Plug-in Device Settings, click Kyocera logo Plug-inQuick Print Options Quick PrintCommon Printing Options OrientationDuplex Printing CollateEdit Quick Print Multiple Pages per SheetEditing Quick Print Options Click Edit Quick PrintSelecting a Profile ProfilesSaving a Profile Quick Print tabImporting a Profile Editing a ProfileExporting a Profile Click ProfilesApplication Based Printing Adding an AssociationEditing an Association Quick Print Basic Basic SettingsPrint Size and Page Size Source and Media TypesCopies QualityDuplex Printing Creating a Custom Page SizePrinting with Custom Size Pages Printing in Duplex Mode CollateFlip on long edge Flip on short edge Print Preview QualityPrinting Collated Documents Previewing a Print JobDisplaying Version Information Kyocera LogoDisplaying Plug-in Information File Name Version Description Date Manufacturer CommentsMultiple Pages per Sheet LayoutPrinting Multiple Pages per Sheet Layout tab, select Multiple pages per sheetScaling Setting Scaling onFull Bleed Selecting crop marksPoster BookletPrinting with Full Bleed Printing a BookletPrinting a Poster KX Driver Separation FinishingRotate Copies Rotating CopiesBi-Fold Offsetting JobsTri-Fold Offset JobsFinishing Edge Printing with Tri-FoldFinishing Edge Combinations Custom Finishing Edge Settings Setting the Finishing EdgePositioning Options for Finishing Edge Finishing tab, select Finishing edgeStaple GutterCreating a Gutter Short edge topPunch Stapling a Print JobCreating Punch Holes for a Print Job Click OK to return to the Print dialog box Print Quality and EcoPrint ImagingSelecting Print Quality Selecting EcoPrintFonts Font SettingsDownload as outlines Allow native downloadSetting Font Substitution Selecting Font SettingsFont Substitution Download as bitmapsSelecting Graphics Settings Disable Device FontsGraphics Pattern ScalingInversion Settings Optimization SettingsCIE Optimization Halftone Screen Setting the Halftone ScreenText and Graphics Effects Adjusting GrayscalePrint text as black Print graphics as blackPublishing tab, select Cover mode Cover ModePublishing Printing CoversCover Mode Options Check Box Selection Cover Insertion Type Choosing Cover Media Printing Page Inserts InsertTransparency Interleaving Insertion OptionsCheck Box Selection Insertion Type Inserts a blank Inserting Backing Sheets Between Transparencies Job User Settings dialog box, available in Device SettingsJob Storage e-MPS Job Storage e-MPS optionsStoring a Job in a Custom Box Custom BoxProof and Hold Quick CopyPrinting a Quick Copy Job Job tab, select Job storage e-MPS Select Quick copyPrinting a Proof and Hold Job Private PrintStoring a Private Print Job Click Job storage e-MPSJob Name Job StorageStoring a Job Storage Job Don’t Use Application NameSelecting a Job Name Overwrite Job NamePrologue/Epilogue AdvancedSelecting a Prologue/Epilogue File Editing a Prologue/Epilogue FileAssigning a Prologue/Epilogue File Deleting a Prologue/Epilogue FileUnassigning a Prologue/Epilogue File Specifying the Insertion PointAdding or Editing a Watermark WatermarkDiagonal default Centered defaultSelecting Pages for Watermark User definedSecurity Watermark Advanced tab, click Security Watermark Adding or Editing a Security WatermarkStandard pattern Document guard patternSelecting Pages for Security Watermark Adjusting Security Watermark CalibrationLight, Normal, Dark ContrastSelecting Status Monitor Options Status MonitorAdvanced tab, click Status Monitor Hide the status monitor/Show the status monitorSetting Status Monitor Preferences EMF Spooling Enable Client ProfileSelecting EMF Spooling Select Use Text to speechGlossary User Guide Iii User Guide Page Page Rev .02