Siemens FC330A manual Overview operating menu

Overview operating menu

After getting operating access, the start menu appears. From the main menu, all menus can be selected (+ page 9, fundamental operation).

With access level 2 all menu points exept other functions − configuration can be selected.

The passwort for access level 2 is:

SELECT: 1. ENabling

(main menu) 2. DISabling

3.INFO polling

4.other functions

ENABLE: 1. Detector/ConTrol ZONES

(1)2. horn/RT/alarm contacts

3. printer

SELECT: 1. ENabling

(main menu) 2. DISabling

3.INFO polling

4.other functions

	ENabling:		1.	detector ’zone’		Enable detector zones 1...256
(1.1)			2.	detector ’element’
						Enable detector elements within zone
			3.	ConTrol ’zone’
						Enable control zones 1...64
			4.	All Fire Ctrl ’zones’		Enable all control zones
		ENabling:	1.	horn		Enable control lines 1...4 for alarm horns
(1.2)			2.	alarm contacts		Enable alarm contacts 1...4
			3.	RT−alarm		Enable remote transmission ALARM
			4.	RT−fault		Enable remote transmission FAULT
		ENable printout messages:			1. log ALL	Enable only event logging or all messages
	(old: #)		2. only ALARMS		3. log NONE	Enable only alarms or none

DISabling: 1. detector/ConTrol ZONES

(2)2. horn/RT/alarm contacts

3. printer

DISabling: 1. detector ’zone’

(2.1) 2. detector ’element’

3.ConTrol ’zone’

4.All Fire Ctrl ’zones’

DISabling: 1. horn

(2.2) 2. alarm contacts

3.RT−alarm

4.RT−fault

Disable detector zones 1...256

disabling permanent or for a set time 1...98h

Disable detector ELEMENTS within zone disabling permanent or for a set time 1...98h

Disable conTrol zones 1....64

Disable all control zones

Disable control line 1..4 for alarm horns Disable alarm contacts 1...4

Disable remote transmission ALARM Disable remote transmission FAULT

SELECT: 1. ENabling (main menu) 2. DISabling

3.INFO polling

4.other functions

INFO: 1. system status

(3)2. event memory/alarm counter

3.configuration/user text

4.configuration zone/line/LON

				Disable only event logging or all messages
ENable printout messages:		1.	log ALL
(old: #)	2. only ALARMS	3.	log NONE Disable only alarms or none

		STATUS: 1.			fault	View fault messages
	(3.1)			2.	isolation	View turned off system components
				3.	pre−alarm	View pre-alarm messages
				4.	techn.alarm /element status	View ELEMENT states
		MEMORY: 1. event memory				View reviewing event list
						View number of alarms and remote alarms
(3.2)				2. alarm counter
			INFO:	1.	configuration system	View general parameter settings
(3.3)				2.	configuration coll line	View parameter settings coll. lines
				3.	user text detector zn/elem	View user texts detector zones/elements
				4.	user text ConTrol zone	View user texts control zones
			INFO:	1.	configuration det. zones	View parameter settings detector zones
(3.4)				2.	configuration addr. lines	View parameter settings addr. lines
				3.	configuration LON devices	View parameter settings LON-bus

6

Fire & Security Products	e1973c-2
Siemens Building Technologies Group	02.2004