Siemens FC330A Viewing disabled zones, Zone reactivation procedure, Disable all zones, hours

Disable all zones

	1.	Enter 555 to disable all zones in the
		building.
		Ü Display shows	*
Permanent disabling	2.	Enter 99 for permanent disabling.
		Ü Display shows	*
		or
Disabling for a few		" Enter the desired disabling time in full
hours		hours (e. g. 2).
		Ü Display shows	*

3.Press St to finish the zone disabling procedure.

Ü Display shows *

ÜThe yellow LED isolation is on.

zone ### − ### SELECTED

> hours DISABLED? (99=permanent)

hm: back to menu		Stop: end operating
zone ### permanent DISABLED
(hm = end)	new zone no.?
hm: back to menu		Stop: end operating
zone ### DISABLED for ## hours
(hm = end)	new zone no.?
hm: back to menu		Stop: end operating
parts of system DISABLED			total:###
WED 21.7.00	15:00

Viewing disabled zones

Several zones disabled
Ü Display shows	*

1.Press key F1 to open list.

Ü Display shows *

2.Press key to view details.

Ü Display shows *

ÜAfter last zone has been displayed, sy- stem turns back to overview.

Ü Display shows *

parts of system DISABLED	total:###
WED 21.7.00 15:00
display ISOLATIONS:	total:###

(key: ↓ = forward / ↑ = backward)

F1: next section hm/Stop: end operating

display ISOLATIONS:		total:###
zone ### − ### permanent DISABLED
↓: forward	F2:ext info	↑: backwards
parts of system DISABLED		total:###
WED 21.7.00	15:00

Zone reactivation procedure

1. Press St .
Ü Display shows	*

2.Select option 1. ä 1. ä 1.

Ü Display shows *

ÜThe yellow LED isolation is off.

SELECT: 1. ENabling (main menu) 2. DISabling

3.INFO polling

4.other functions

ENable zone: (range ### to ###)

> zone no.? (555 = all)

hm: back to menu Stop: end operating

24

Fire & Security Products	e1973c-4
Siemens Building Technologies Group	02.2004