Siemens FC330A manual Fundamental operation, How to operate the control console

Fundamental operation

How to operate the control console

To choose a menu item in the display of the console:

1. Press St .
Ü Display shows	*

START system operating > enter password?

hm /Stop: end operating

Access level + page 11	2.	Enter the password and press ok .
		Ü Display shows	*
	3.	Select the menu item with the	and
		keys and press ok .

or

SELECT: 1. ENabling (main menu) 2. DISabling

3.INFO polling

4.other functions

"Enter the number of the menu option on the numeric keypad (e. g. option 2.).

Ü Display shows	*	DISabling:	1.	detector/ConTrol ZONES
4. Repeat the selection	until the required	(2)	2.	horn/RT/alarm contacts
			3.	printer
menu is displayed.

5.Follow the instructions on the display.

6.Finish the operation by pressing St . or

" Press hm to return to the previous menu.

Example

The following description is an example for choosing the Disable elements menu.

1.	Press St .
2.	Log in.
	Ü Display shows	*

3.Select option 2. with the and keys and press ok .

or

" Enter “2”.
Ü Display shows	*

SELECT: 1. ENabling

(main menu) 2. DISabling

3.INFO polling

4.other functions

DISabling: 1. detector/ConTrol ZONES

(2)2. horn/RT/alarm contacts

3. printer

4.Select option 1. with the and keys and press ok .

or

" Enter “1”.
Ü Display shows	*

5.Select option 2. with the and keys and press ok .

or

" Enter “2”.
Ü Display shows	*

Actions in the operation manual

DISabling: 1. detector ’zone’

(2.1) 2. detector ’element’

3.ConTrol ’zone’

4.All Fire Ctrl ’zones’

DISABLE element:

> zone no.? (range ### − ###)

hm: back to menu Stop: end operating

In this operation manual, selecting a menu item will be described from now on in a short form as follows:

" Select option 2. ä 1. ä 2.
		DISABLE element:
Ü Display shows	*	> zone no.? (range ### − ###)
		hm: back to menu	Stop: end operating

9

Fire & Security Products	e1973c-2
Siemens Building Technologies Group	02.2004