•For your safety, only use the manufacturer’s accessories and spare parts designed for your appliance.
•Do not pull on the cord to unplug the appliance.
•Never put your teapot in a micro- wave oven, on a flame or on elec- tric cooking plates.
•Do not fill the appliance with water if it is still hot.
•All appliances are subject to strict quality control procedures. These include actual usage tests on randomly selected appliances, which would explain any traces of use.
•Do not use the jug without the lid.
DESCRIPTION
1-
2- Spout
3- Handle
4- Glass pot
5- Water level
6- Brewing basket
7- Start button
8- Manual stop button
9- Bottom heating assembly
10- Power supply base
BEFORE FIRST USE
-Remove all packaging, labels or accessories on the inside and outside of the product.
-Set the length of the power supply cord by winding it under the base. Push the cord into the slot.
-Operate your appliance as follows:
-fill with water up to the maximum level
-start by pressing button (7) and wait for the appliance to automatically stop.
- rinse. |
| |
• Handle the teapot with care as glass is |
| |
fragile. | EN | |
• Avoid thermal shocks: do not splash or | ||
| ||
fill with cold water when the appliance |
| |
is still hot. |
|
INSTRUCTIONS FOR USE
-Remove the lid unit + brewing basket (Fig 2a), by squeezing in the buttons on the lid.
-Fill the teapot with the desired quantity of water
•Never fill the teapot above the maximum
water level, nor below the minimum level.
-Detach the brewing basket (6) from the lid
(1) by applying pressure to the lid then tur- ning it slightly, and release.
-Place the tea or herbal tea in the brewing basket (6). Remove the cardboard label
from bags.
Proportion to taste and in relation to the quality of the tea. As an indication, for 1 litre of water we recommend 1 bag/1 spoonful of tea for a light drink, 2 bags/2 spoonfuls for a fairly strong drink, 3 bags/3 spoonfuls of tea for a strong drink.
-Replace the lid by placing it on the brewing basket and inserting the lips on the rim of the basket in the grooves of the lid, press and turn slightly, then release.
-Squeeze the buttons on the lid and position the whole unit in the pot (brewing basket and rod), taking care to ensure that the
washer at the bottom of the rod is correctly centred in the hole. (Fig 2b)
IMPORTANT: NEVER attempt to position the brewing basket first and then the lid on the teapot as you are likely to damage the plas- tic parts. Carefully follow the instructions.
-Release the buttons on the lid to lock it automatically to the pot.
-Start up the teapot by pressing switch “7”.
-The water will be sucked in and heated before going up in the pump and sprinkling
the tea leaves and running out through the brewing basket (Fig 3).
10