9100013389 FS45XX_110x154 23/05/13 12:33 Page5
TY | PES OF WATER NOT TO US | E? | EN |
The types of water listed below contain mineral elements that can cause premature wear of the appliance: scented or softened water and water with additives should not be used in your Tefal iron.
USE
Adjust the temperature
• Select the temperature (see table below) setting the thermostat facing the indicator.
Fabric | Position of Thermostat Cursor | |
|
| |
Silk | • | |
Synthetic (Polyester, Acelate, Acrylic, Nylon) | ||
| ||
|
| |
Wool | •• | |
|
| |
Cotton | ••• | |
|
| |
Linen | MAX | |
|
|
•The thermostat light comes on. It will go out when the soleplate is hot enough.
•Your iron heats up quickly: so begin by ironing fabrics that are ironed at low temperatures first, then go on to those requiring a higher temperature.
•When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend testing the fabric first on an inconspicuous place eg (inside
the hem).
It is normal for the indicator light to switch on and off during ironing.
If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again.
STORAGE AND MAINTENANCE
Store your iron
•Unplug the iron.
•Eject the spray block and empty the water tank.
•Wait until the soleplate cools down and wind the cord around the heel of the iron.
•Store the cold iron on its heel.
Always set your iron on its heel, in order to avoid damage or scratching to the soleplate. Caution: placing your iron flat onto a metallic surface might damage or scratch the soleplate.
Cleaning the soleplate
•Unplug the iron, and when the soleplate is just warm, wipe it with a soft cloth.
Never use abrasive or aggressive products.
5