HP K manual Load originals, Avoid paper jams

Page 17

HP OfficeJet K Series

Load originals

If you are working with originals that are printed on 16-24 lb. (60-90 gsm) plain paper or HP Premium Inkjet paper, you can load more than one in the automatic document feeder (ADF). If you are working with photos or originals of an odd size (no smaller than 3-by- 3 inches or 76-by-76 millimeters), load them in the ADF one at a time. When working with fragile, torn, or odd-sized originals, we recommend that you use a document sleeve or sheet protector (available from most office-product stores) for the original. Place a single sleeve into the ADF with the sealed edge first and the transparent side down.

1Place the original(s) in the ADF with the printed side facing toward the back and with the top of the document pointing down.

2Adjust the document guides to fit your document.

Avoid paper jams

To avoid paper jams, remove papers from the output tray frequently. Output tray capacity is affected by the type of paper and the amount of ink you are using. For more information about output-tray capacity, see “Technical information.” For help with clearing a paper jam, see the Troubleshooting Help available through the Director.

Chapter 4—Load paper or transparency film, or load originals

13

Image 17

Contents HP OfficeJet K Series Safety Information Contents Technical information Use Hewlett-Packard’s support servicesFollowing shows the left side of the front panel Review your unit’s front panelFollowing shows the right side of the front panel Review the Director Use your HP OfficeJet with a PCIcon Indicates Review the status windowGet help Where can I find help?Get help Load the input tray with letter-, legal-, or A4-size paper Load paper or transparency film, or load originalsLoad paper or transparency film, or load originals Paper Tips Review tips for loading specific types of paperLoad the input tray with envelopes only works with printing HP OfficeJet K Series To do this for a print job Set the paper typeTo do this for future copy jobs Avoid paper jams Load originalsHP OfficeJet K Series Use the print features Select HP OfficeJet K Series Start a print jobUse the scan features To do this from your HP OfficeJet Begin a scanTo do this from within a program To do this from your PCHP OfficeJet K Series Use the copy features Initiate the copy process from your HP OfficeJet Make copiesInitiate the copy process from your PC Press Start COPY, Black or ColorClick Start Copy Stop copyingHP OfficeJet K Series Use the fax features To do this using the front panel Enable fax confirmationTo do this using the PC Press until Print Report Send Only appearsPress Start FAX, Black or Color Send a faxInitiate the fax process from your HP OfficeJet Initiate the fax process from your PC Click Send Fax Now Initiate the process from within a program Receive a fax manually Receive a faxPhone answering area, select Manual Save frequently used fax numbersMicrosoft’s plug-and-play messages do not appear Additional setup informationNew Hardware message appears Windows 95, 98, 2000, or XP Set up for network printing using Windows sharing Windows Add Printer featureTo install the print server Your PC is unable to communicate with your HP OfficeJetUse your HP OfficeJet with Windows Set basic fax settings using the front panelSet the date and time Set the fax headerEnter text Set the answer modeSet the Rings to Answer setting Check for dial tone Remove and reinstall your HP OfficeJet softwareInternet Use Hewlett-Packard’s support servicesCall in the U.S. post-warranty HP Distribution Center HP OfficeJet K Series Technical information Power specificationsRegulatory notices HP OfficeJet K Series Geräuschemission Declaration of Conformity HP OfficeJet K Series Index Save fax numbers 32 scan 2Group Speed Dial 3Delete Speed 4Print Speed Dial List C6747-90278