HP K manual Technical information, Power specifications

Page 47

11

Technical information

For comprehensive information, see the fully searchable Onscreen Guide. To access the guide, go to the Director, click Help, and choose Onscreen Guide.

Power specifications

•Power consumption: 50W maximum

•Source (Input) Voltage: 100 to 240 VAC*, grounded

•Input Frequency: 50 to 60 Hz

•Current: 1A maximum

*Figures are based on using the AC adapter that came with your unit (HP part number 0950-2880).

Order print cartridges

Print Cartridges

HP Reorder Number for K80/ K80xi

HP Reorder Number for K60/K60xi

 

 

 

 

 

 

HP black print cartridges

51645A, 51645G

51645A, 51645G

 

 

 

HP color print cartridges

C6578A, C6578D

C6578A, C6578D

 

 

 

If you have Internet access, you can get more information from the HP Web site at:

www.officejetsupport.com

Regulatory information

The following sections describe product requirements from various regulatory agencies.

Notice to users of the U.S. telephone network: FCC requirements

This equipment complies with FCC rules, Part 68. On this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalent Number (REN) for this equipment. If requested, provide this information to your telephone company.

An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. This equipment connects to the telephone network through the following standard network interface jack: USOC RJ-11C.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called. Too many devices on one line may result in failure to ring in response to an incoming call. In most, but not all, areas the sum of the RENs of all devices should not exceed five

(5). To be certain of the number of devices you may connect to your line, as determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area.

If this equipment causes harm to the telephone network, your telephone company may discontinue your service temporarily. If possible, they will notify you in advance. If advance notice is not practical, you will be notified as soon as possible. You will also be advised of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper operation of your equipment. If they do, you will be given advance notice so you will have the opportunity to maintain uninterrupted service.

If you experience trouble with this equipment, please contact the manufacturer, or look elsewhere in this manual, for warranty or repair information. Your telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.

Chapter 11—Technical information

43

Page 46 Page 48
Image 47
Page 46 Page 48
Contents HP OfficeJet K Series Safety Information Contents Technical information Use Hewlett-Packard’s support servicesFollowing shows the left side of the front panel Review your unit’s front panelFollowing shows the right side of the front panel Review the Director Use your HP OfficeJet with a PCIcon Indicates Review the status windowGet help Where can I find help?Get help Load the input tray with letter-, legal-, or A4-size paper Load paper or transparency film, or load originalsLoad paper or transparency film, or load originals Paper Tips Review tips for loading specific types of paperLoad the input tray with envelopes only works with printing HP OfficeJet K Series To do this for a print job Set the paper typeTo do this for future copy jobs Avoid paper jams Load originalsHP OfficeJet K Series Use the print features Select HP OfficeJet K Series Start a print jobUse the scan features To do this from your HP OfficeJet Begin a scanTo do this from within a program To do this from your PCHP OfficeJet K Series Use the copy features Press Start COPY, Black or Color Make copiesInitiate the copy process from your HP OfficeJet Initiate the copy process from your PCClick Start Copy Stop copyingHP OfficeJet K Series Use the fax features Press until Print Report Send Only appears Enable fax confirmationTo do this using the front panel To do this using the PCPress Start FAX, Black or Color Send a faxInitiate the fax process from your HP OfficeJet Initiate the fax process from your PC Click Send Fax Now Initiate the process from within a program Receive a fax manually Receive a faxPhone answering area, select Manual Save frequently used fax numbersMicrosoft’s plug-and-play messages do not appear Additional setup informationNew Hardware message appears Windows 95, 98, 2000, or XP Your PC is unable to communicate with your HP OfficeJet Windows Add Printer featureSet up for network printing using Windows sharing To install the print serverSet the fax header Set basic fax settings using the front panelUse your HP OfficeJet with Windows Set the date and timeEnter text Set the answer modeSet the Rings to Answer setting Check for dial tone Remove and reinstall your HP OfficeJet softwareInternet Use Hewlett-Packard’s support servicesCall in the U.S. post-warranty HP Distribution Center HP OfficeJet K Series Technical information Power specificationsRegulatory notices HP OfficeJet K Series Geräuschemission Declaration of Conformity HP OfficeJet K Series Index Save fax numbers 32 scan 2Group Speed Dial 3Delete Speed 4Print Speed Dial List C6747-90278
Top Page Image Contents