HP 3100 manual Send a fax using monitor dialing, Send a fax from memory, To send a fax from memory

Page 28

Chapter 3

Send a fax using monitor dialing

Monitor dialing allows you to dial a number from the control panel as you would dial a regular telephone. When you send a fax using monitor dialing, you can hear the dial tones, telephone prompts, or other sounds through the speakers on the HP Fax. This enables you to respond to prompts while dialing, as well as control the pace of your dialing.

TIP: If you do not enter your calling card PIN fast enough, the HP Fax might start sending fax tones too soon and cause your PIN not to be recognized by the calling card service. If this is the case, you can create a speed dial entry to store the PIN for your calling card.

NOTE: Make sure the volume is turned on, or you will not hear a dial tone.

To send a fax using monitor dialing from the control panel

1.Load your originals. For additional information, see Load originals.

2.Press START FAX Black or START FAX Color.

If the HP Fax detects an original loaded in the automatic document feeder, you will hear a dial tone.

3.When you hear the dial tone, enter the number by using the keypad on the control panel.

4.Follow any prompts that might occur.

TIP: If you are using a calling card to send a fax and you have your calling card PIN stored as a speed dial, when prompted to enter your PIN, press Speed Dial or a one-touch speed dial button to select the speed dial entry where you have your PIN stored.

Your fax is sent when the receiving fax machine answers.

Send a fax from memory

You can scan a black-and-white fax into memory and then send the fax from memory. This feature is useful if the fax number you are trying to reach is busy or temporarily unavailable. The HP Fax scans the originals into memory and sends them once it is able to connect to the receiving fax machine. After the HP Fax scans the pages into memory, you can immediately remove the originals from the document feeder tray.

NOTE: You can only send a black-and-white fax from memory.

To send a fax from memory

1.Load your originals print side down into the document feeder tray.

2.In the Fax area, press Fax Menu. The Enter Number prompt appears.

3.Enter the fax number by using the keypad, press Speed Dial or a one-touch speed dial button to select a speed dial, or press Redial/Pause to redial the last number dialed.

4.In the Fax area, press Fax Menu repeatedly until How to Fax appears.

24 Fax

Image 28
Contents HP 3100 Fax series HP 3100 Fax series Copyright information Safety informationHewlett-Packard Company notices Page Contents Fax CopyConfigure and manage HP supplies and fax specificationsSupport and warranty Maintain and troubleshootRegulatory information Get started Find other resources for the productUnderstand the HP Fax parts Resource Description LocationFront view Back viewControl panel buttons and lights Label Icon Name and DescriptionLoad full-size paper To load full-size paper Load originals To load an original in the document feeder trayTo change settings from the control panel Change HP Fax settingsSend a basic fax Set the answer mode Set up faxing for the HP FaxTo select the answer mode via the control panel To send a basic fax from the control panelSet up faxing parallel phone systems Countries/regions with a parallel-type phone systemSerial-type fax setup Setup Menu Use the HP FaxControl panel menus Fax Menu Copy MenuControl-panel message types Use control panel menusMessage type Type numbers and text on the control-panel keypad Text and symbolsTo enter text Set up speed-dial entries Available symbols for dialing fax numbersTo enter a space, pause, or symbol To erase a letter, number, or symbolSet up speed-dial entries Set up fax numbers as speed-dial entries or groupsSet up a speed-dial group Tips for selecting and using print media Select print mediaPrint and view a list of speed-dial entries Photo mediaUnderstand specifications for supported media Understand supported media types and weightsSet minimum margins Understand supported sizesSend a fax FaxSend a fax manually from a phone To send a fax manually using the attached handset To initiate a fax manually from an external phoneSend a fax using monitor dialing To send a fax using monitor dialing from the control panelSend a fax from memory Press Start FAX Black or Start FAX ColorTo cancel a scheduled fax Schedule a fax to send laterSend a fax to multiple recipients To schedule a fax from the control panelSend a color original or image/embedded picture fax To send a fax to multiple recipients using group speed dialPress Start FAX Black again Change the fax resolution Change the fax resolution and Lighter/Darker settingsPress Start FAX Color To change the resolution from the control panel Change the Lighter / Darker settingSet new default settings To set new default settings from the control panelSend a fax in Error Correction Mode To change the ECM setting from the control panelReceive a fax Receive a fax manuallySet up backup fax reception To receive a fax manuallyReprint received faxes from memory Poll to receive a faxTo set up poll to receive a fax from the control panel Forward faxes to another numberSet the paper size for received faxes To forward faxes from the control panelSelect Basic Fax Setup and then select Fax Paper Size Set the junk fax modeSet automatic reduction for incoming faxes Block junk fax numbersAdd numbers to the junk fax list To select a number from the caller ID listRemove numbers from the junk fax list To remove numbers from the list of junk fax numbersConfigure the fax header Change fax settingsSet the number of rings before answering Set the fax error correction mode Press Advanced Fax Setup, and then press Distinctive RingChange the answer ring pattern for distinctive ring Set the dial typeSelect Advanced Fax Setup, and then press Fax Speed Set the redial optionsSet the fax speed To set the fax speed from the control panelCancel a fax To cancel a faxTo cancel a number you are dialing Fax over the InternetChange the copy settings To save the current settings as defaults for future jobsCopy Make copies from the control panelSet the copy paper size Set the number of copiesSet the copy paper type Change copy speed or quality Resize an original to fit onto letter or A4 paperTo change the copy quality from the control panel To resize a document from the control panelAdjust the lightness and darkness of your copy To adjust the copy contrast from the control panelCopy a legal-size document onto letter paper Enhance blurred areas of your copyCancel a copy job Enhance light areas of your copyTo copy a blurred document from the control panel Press Start Copy ColorConfigure and manage Manage the HP FaxUse reports Print fax confirmation reportsPrint fax error reports Print and view the fax logTest fax setup To test fax setupFax test failed To print the fax log from the control panelFax Hardware Test failed SolutionFax Connected to Active Telephone Wall Jack test failed Phone Cord Connected to Correct Port on Fax test failed Using Correct Type of Phone Cord with Fax test failed Dial Tone Detection test failedFax Line Condition test failed Work with print cartridges Maintain and troubleshootPrint cartridges Handle the print cartridges Replace the print cartridgesTo replace the print cartridges Close the print cartridge door Clean the print cartridges To clean the print cartridges from the control panelAlign the print cartridges To align the cartridges from the control panel at any timeClean the print cartridge contacts To clean the print cartridge contactsClean the area around the ink nozzles To clean the area around the ink nozzles Store print cartridgesClean the HP Fax Clean the glass stripClean the white strip To clean the white stripSolve printing problems Troubleshooting tips and resourcesClean the exterior Problem Possible solution Poor print quality and unexpected printoutsSolve paper-feed problems Solve copy problemsDocuments are missing or faded Solve fax problems DefectsHP Fax is having problems sending and receiving faxes Problem Problem Possible solution Problem Troubleshoot setup issues To extend your phone cordClear paper jams To clear a paper jam from the rear doorAvoid paper jams To clear a paper jam in the automatic document feederHP supplies and fax specifications Order printing supplies online SuppliesHP media Print cartridgesPhysical specifications Product features and capacitiesMemory specifications Print specificationsFax specifications Environmental specificationsElectrical specifications Acoustic emission specifications noise levels per ISOAppendix a Support and warranty Obtain electronic supportObtain HP telephone support Before you callAfter the phone support period Additional warranty options Prepare the HP Fax for shipmentSupport process HP support by phonePack the HP Fax To pack the HP FaxWarranty HP product Duration of limited warrantyFCC statement Regulatory informationFCC statement Noise emission statement for Germany GeräuschemissionAutomatic Dialers Regulatory model number Environmental product stewardship programEnvironmental product stewardship program Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση Declaration of conformity Declaration of ConformityIndex Page Page Page Page CB820-90001* *CB820-90001
Related manuals
Manual 8 pages 19.21 Kb Manual 166 pages 26.48 Kb Manual 12 pages 32.22 Kb Manual 272 pages 43.56 Kb