HP 3100 manual Change the fax resolution and Lighter/Darker settings, Press Start FAX Color

Page 31

3.Enter the fax number by using the keypad, press Speed Dial or a one-touch speed dial button to select a speed dial, or press Redial/Pause to redial the last number dialed.

4.Press START FAX Color.

If the HP Fax detects an original loaded in the automatic document feeder, it sends the document to the number you entered.

NOTE: If the recipient's fax machine only supports black-and-white faxes, the HP Fax automatically sends the fax in black and white. A message appears after the fax has been sent indicating that the fax was sent in black and white. Press OK to clear the message.

Change the fax resolution and Lighter/Darker settings

You can change the Resolution and Lighter / Darker settings for documents that you are faxing.

NOTE: These settings do not affect copy settings. Copy resolution and lightness/ darkness are set independently from fax resolution and lightness/darkness.

Change the fax resolution

Change the Lighter / Darker setting

Set new default settings

Change the fax resolution

The Resolution setting affects the transmission speed and quality of faxed black-and- white documents. If the receiving fax machine does not support the resolution you have chosen, the HP Fax sends faxes at the highest resolution supported by the receiving fax machine.

NOTE: You can only change the resolution for faxes that you are sending in black and white. The HP Fax sends all color faxes using Fine resolution.

The following resolution settings are available for sending faxes: Fine, Very Fine, Photo, and Standard.

Fine: provides high-quality text suitable for faxing most documents. This is the default setting. When sending faxes in color, the HP Fax always uses the Fine setting.

Very Fine: provides the best quality fax when you are faxing documents with very fine detail. If you choose Very Fine, be aware that the faxing process takes longer to complete and you can only send black-and-white faxes using this resolution. If you send a color fax, it will be sent using Fine resolution instead.

Photo: provides the best quality fax when sending images/embedded pictures in black and white. If you choose Photo, be aware that the faxing process takes longer to complete. When faxing images/embedded pictures in black and white, HP recommends that you choose Photo.

Standard: provides the fastest possible fax transmission with the lowest quality.

When you exit the Fax menu, this option returns to the default setting unless you set your changes as the default.

Send a fax

27

Image 31
Contents HP 3100 Fax series HP 3100 Fax series Copyright information Safety informationHewlett-Packard Company notices Page Contents Copy FaxMaintain and troubleshoot Configure and manageHP supplies and fax specifications Support and warrantyRegulatory information Resource Description Location Get startedFind other resources for the product Understand the HP Fax partsBack view Front viewLabel Icon Name and Description Control panel buttons and lightsLoad full-size paper To load full-size paper To load an original in the document feeder tray Load originalsTo change settings from the control panel Change HP Fax settingsSend a basic fax To send a basic fax from the control panel Set the answer modeSet up faxing for the HP Fax To select the answer mode via the control panelCountries/regions with a parallel-type phone system Set up faxing parallel phone systemsSerial-type fax setup Fax Menu Copy Menu Setup MenuUse the HP Fax Control panel menusControl-panel message types Use control panel menusMessage type Type numbers and text on the control-panel keypad Text and symbolsTo enter text To erase a letter, number, or symbol Set up speed-dial entriesAvailable symbols for dialing fax numbers To enter a space, pause, or symbolSet up speed-dial entries Set up fax numbers as speed-dial entries or groupsSet up a speed-dial group Photo media Tips for selecting and using print mediaSelect print media Print and view a list of speed-dial entriesUnderstand supported sizes Understand specifications for supported mediaUnderstand supported media types and weights Set minimum marginsSend a fax FaxSend a fax manually from a phone To initiate a fax manually from an external phone To send a fax manually using the attached handsetPress Start FAX Black or Start FAX Color Send a fax using monitor dialingTo send a fax using monitor dialing from the control panel Send a fax from memoryTo schedule a fax from the control panel To cancel a scheduled faxSchedule a fax to send later Send a fax to multiple recipientsSend a color original or image/embedded picture fax To send a fax to multiple recipients using group speed dialPress Start FAX Black again Change the fax resolution Change the fax resolution and Lighter/Darker settingsPress Start FAX Color To set new default settings from the control panel To change the resolution from the control panelChange the Lighter / Darker setting Set new default settingsReceive a fax manually Send a fax in Error Correction ModeTo change the ECM setting from the control panel Receive a faxTo receive a fax manually Set up backup fax receptionPoll to receive a fax Reprint received faxes from memoryTo forward faxes from the control panel To set up poll to receive a fax from the control panelForward faxes to another number Set the paper size for received faxesBlock junk fax numbers Select Basic Fax Setup and then select Fax Paper SizeSet the junk fax mode Set automatic reduction for incoming faxesTo remove numbers from the list of junk fax numbers Add numbers to the junk fax listTo select a number from the caller ID list Remove numbers from the junk fax listConfigure the fax header Change fax settingsSet the number of rings before answering Set the dial type Set the fax error correction modePress Advanced Fax Setup, and then press Distinctive Ring Change the answer ring pattern for distinctive ringTo set the fax speed from the control panel Select Advanced Fax Setup, and then press Fax SpeedSet the redial options Set the fax speedFax over the Internet Cancel a faxTo cancel a fax To cancel a number you are dialingMake copies from the control panel Change the copy settingsTo save the current settings as defaults for future jobs CopySet the copy paper size Set the number of copiesSet the copy paper type To resize a document from the control panel Change copy speed or qualityResize an original to fit onto letter or A4 paper To change the copy quality from the control panelEnhance blurred areas of your copy Adjust the lightness and darkness of your copyTo adjust the copy contrast from the control panel Copy a legal-size document onto letter paperPress Start Copy Color Cancel a copy jobEnhance light areas of your copy To copy a blurred document from the control panelPrint fax confirmation reports Configure and manageManage the HP Fax Use reportsPrint and view the fax log Print fax error reportsTo print the fax log from the control panel Test fax setupTo test fax setup Fax test failedFax Hardware Test failed SolutionFax Connected to Active Telephone Wall Jack test failed Phone Cord Connected to Correct Port on Fax test failed Dial Tone Detection test failed Using Correct Type of Phone Cord with Fax test failedFax Line Condition test failed Work with print cartridges Maintain and troubleshootPrint cartridges Replace the print cartridges Handle the print cartridgesTo replace the print cartridges Close the print cartridge door To align the cartridges from the control panel at any time Clean the print cartridgesTo clean the print cartridges from the control panel Align the print cartridgesTo clean the print cartridge contacts Clean the print cartridge contactsClean the area around the ink nozzles Store print cartridges To clean the area around the ink nozzlesClean the glass strip Clean the HP FaxTo clean the white strip Clean the white stripSolve printing problems Troubleshooting tips and resourcesClean the exterior Poor print quality and unexpected printouts Problem Possible solutionSolve copy problems Solve paper-feed problemsDocuments are missing or faded Defects Solve fax problemsHP Fax is having problems sending and receiving faxes Problem Problem Possible solution Problem To extend your phone cord Troubleshoot setup issuesTo clear a paper jam from the rear door Clear paper jamsTo clear a paper jam in the automatic document feeder Avoid paper jamsPrint cartridges HP supplies and fax specificationsOrder printing supplies online Supplies HP mediaPrint specifications Physical specificationsProduct features and capacities Memory specificationsAcoustic emission specifications noise levels per ISO Fax specificationsEnvironmental specifications Electrical specificationsAppendix a Before you call Support and warrantyObtain electronic support Obtain HP telephone supportHP support by phone After the phone support period Additional warranty optionsPrepare the HP Fax for shipment Support processTo pack the HP Fax Pack the HP FaxHP product Duration of limited warranty WarrantyFCC statement Regulatory informationFCC statement Geräuschemission Noise emission statement for GermanyAutomatic Dialers Environmental product stewardship program Regulatory model numberEnvironmental product stewardship program Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση Declaration of Conformity Declaration of conformityIndex Page Page Page Page CB820-90001* *CB820-90001
Related manuals
Manual 8 pages 19.21 Kb Manual 166 pages 26.48 Kb Manual 12 pages 32.22 Kb Manual 272 pages 43.56 Kb