Tefal KO102810 manual Using the kettle, Before first use

•Protect the appliance from humidity and frost.

•If your appliance has been damaged, or if it is not operating correctly, or if the power cord or plug have been damaged: we recommend that you have the appliance examined. Except for the cleaning and descaling procedures described in the instructions for the appliance, all other work on the appliance must only be carried out by a TEFAL approved service centre.

•Unplug the appliance when not in use for long periods and when you are cleaning it.

•All of our appliances are subjected to strict quality checks. Operating checks are carried out randomly on appliances, which explains why certain appliances may appear to have been used.

•This appliance is not designed to be used by persons (including children) with impaired physical, sensorial or mental capacities or persons with no experience or knowledge, unless they are monitored or trained by a person responsible for their safety prior to any use of the appliance.

•Children should be watched to ensure that they do not play with the appliance.

•This appliance is intended to be used only in the household.

It is not intended to be used in the following applications, and the guarantee will not apply for:

-staff kitchen areas in shops, offices and other working environments;

-farm houses;

-by clients in hotels, motels and other residential type environments;

-bed and breakfast type environments.

Using the kettle

1 TO OPEN THE LID.

•Pull the lid in a vertical direction (fig. 3).

•To close it, press down on the lid.

2 PLACE THE KETTLE ON A SMOOTH, CLEAN AND COOL SURFACE.

• Your kettle must only be used with its own scale filter.

3 FILL THE KETTLE WITH THE REQUIRED QUANTITY OF WATER. (fig 4)

•You can fill the kettle by the spout, which helps to keep the filter in good condition. Otherwise, at least cover the heating coil (or the bottom of the kettle).

•Do not fill the kettle when it is plugged into the mains.

•Do not fill the kettle above the maximum level. If the kettle is overfilled, boiling water may spill over the top.

•Do not use without water.

•Check that the lid is closed correctly before use.

4 PLUG INTO THE MAINS.

5 TO START THE KETTLE.

•Press the ON/OFF button at the top or the bottom of the handle, depending on the model. (fig 5)

6 THE KETTLE MAY LIGHT UP, DEPENDING ON MODEL.

7 THE KETTLE WILL STOP AUTOMATICALLY.

Before first use

1 Remove all packaging, stickers and accessories from the inside and outside of the kettle.

2 Unwind the power cord completely (fig 1).

3 Set the voltage selector (6) (located under the base)

(fig. 2).

Set the kettle to the same voltage as that of the system where you are using a coin, for example. If the voltage selected is 120 V, the kettle operates between 100 and 120 V. If 240 V is selected, the kettle operates between 220 and 240 V.

ATTENTION! Check, if necessary, that you have an adapter which complies with the safety standards of the country.

•As soon as the water boils, you can stop the kettle manually by pressing the ON/OFF button. Depending on the model, the light inside the kettle or the indicator light will be extinguished when the water boils. Check that the ON/OFF button is in the OFF position after the water has boiled and that the kettle is not operating before unplugging it.

•Do not use the water from the first two or three uses of the kettle, as it could contain dust. Rinse the kettle and the filter separately.

8 STORAGE OF THE KETTLE.

•Empty the water from the kettle, and leave it to cool down before wiping it dry. Wind the power cord around the appliance and place it in the storage bag along with its cups and spoons.

•If necessary, the bag may be washed by hand.

8 9