1 Introduction
1.1 Description
The peristaltic pump motor offers microprocessor control and a digital display, and is designed to be fully compatible with our peristaltic pump. No mounting plate is needed, just two mounting screws. A 1⁄10 HP (75W) motor provides flow rates of up to 2280 mL/minute. A convenient membrane keypad lets you enter values and control all pump operations. A dot matrix LCD provides for easy view. Calibrating the unit is easy with the
The peristaltic pump motor provides you with four different modes of pumping:
• The RPM Mode | for pumping at a certain RPM setting for |
| an unlimited period of time |
• The FLOW RATE Mode | for pumping at a certain FLOW RATE |
| setting for an unlimited period of time |
• The TIME Mode | for pumping at a certain RPM or FLOW |
| RATE setting for a specific period of time |
• The TOTAL VOLUME Mode | for pumping at a certain RPM or FLOW |
| RATE setting to dispense a specific amount |
| of fluid |
The pump is available in two versions: 110Vac and 220Vac.
1.2Features
•Digital Display of Flow Rate, RPM, Total Volume, Fluid Temperature (°C or °F), Flow Duration, or Tube ID
•Ability to Calibrate Precise Flow Rates
•Flow Rates of 1 to 2280 mL/minute
•Reversible Motor for Pumping in Both Directions at Speeds of 10 to 600 RPM
•
•Type K SMP Female Thermocouple Input
•Tachometer Feedback, ±0.5% Speed Control
•Accepts Two Pumps, One on Each Side or Two Stacked Together
•Membrane Keypad for Easy Operation and Calibration
•Remote Control Options - Aux In: Remote Start/Stop, TTL/CMOS
Aux Out: Open Collector
•
•Accepts Metric or English Tube Sizes
•Displays Information in English, French, Spanish, German, or Italian