Omega Vehicle Security FPU5-MT-220, FPU5-MT-110 Membrane Keypad Details cont’d, Flow Rate key

Parts of the Pump Motor 2

	Table 2-4. Membrane Keypad Details (cont’d)
Item	Description	Function
21	FLOW RATE key	Initiates the FLOW RATE Mode of pumping
		and displays the FLOW RATE setting of the
		pump motor; displays the actual fluid flow
		rate, as it occurs in time
22	TUBE ID key	Selects the inner diameter of a tube
23	TIME key	Initiates the TIME Mode of pumping and
		displays the TIME setting of the pump motor;
		displays of the actual time for which the pump
		has been running
24	TOTAL VOLUME key	Initiates the TOTAL VOLUME Mode of
		pumping and displays of the TOTAL VOLUME
		setting of the pump motor; displays the actual
		volume of fluid dispensed, as it occurs in time
25	CALIBRATE key	Starts and completes calibration of a tube

26Red LED for the CALIBRATE key Lights after calibration is complete, indicating that the motor is pumping according to that calibration

27	PRIME key	Allows for momentary running of the motor;
		useful for filling a tube with fluid before
		calibrating
28	START/STOP key	Alternately starts and stops the pump
29	(UP ARROW key)	Increases values of a setting after you have
		pressed a key choosing that setting (refer to
		Table 2-5)

30 (DOWN ARROW key)

Decreases values of a setting after you have pressed a key choosing that setting (refer to Table 2-5)

2-5