Omega Vehicle Security FPU5-MT-110, FPU5-MT-220 manual Display Xxx mL/min

6Operating the Pump Motor in the RUNNING Display Mode

Range (7.0 mm tube ID)

37 mL/min

38 mL/min

.

1999 mL/min

2000 mL/min

.

2186 mL/min

2187 mL/min

Range (8.0 mm tube ID)

39 mL/min

40 mL/min

.

1999 mL/min

2000 mL/min

.

2315 mL/min

2316 mL/min

Range (7.0 mm tube ID)



2187 mL/min 2186 mL/min

.

2000 mL/min

1999 mL/min

.

38 mL/min

37 mL/min

Range (8.0 mm tube ID)



2316 mL/min 2315 mL/min

.

2000 mL/min

1999 mL/min

.

40 mL/min

39 mL/min

Figure 6-4. FLOW RATE Ranges (cont’d)

6.Once the display shows the FLOW RATE setting you desire, press the START/STOP key.

START

STOP

Display

xxx mL/min

ACTION

Pump(s) starts;

press again pump(s)

stops

As the fluid begins to dispense, the non-flashing display shows the calculated fluid flow rate.

NOTE

Refer to Section 6.5 to learn about how to prevent tubing from moving through the pump.

7.To stop pumping in the FLOW RATE Mode, simply press the START/STOP key again. The pump stops running, and the display returns to the STOPPED Display Mode.

Table 6-2 shows how other keys and buttons can be used while pumping in the FLOW RATE mode.

6-8