Stovax Studio 22 manual Cleaning the Studio, Changing the Studio Batteries, All models

USER INSTRUCTIONS

EMERGENCY SHUT OFF

If the batteries fail during use of the fire, move the switch to the OFF (O) position, Diagram 3

(This switch is set to be ON during normal operation and must remain ON)

3

AR1933

3.CLEANING the STUDIO

3.1Make sure the fire and surrounds are cool before cleaning. Use:

•A damp cloth for the painted frame

•Use soap and water to clean the glass

3.2Opening the Glass Door

3.2.1 Steel Frame only

[If fitted with a Steel Frame, this needs to be removed first:

•Lift the frame upwards off its four support brackets,

Diagram 4

4

AR2136

3.3All models

Using the allen key provided to release the upper and lower catches on the right side of the door:

•Slide the allen key into the gap between the door and frame and locate the catch of the upper lock

•Push the allen key DOWN

•Slide the allen key into the gap and locate the lower lock

•Push the allen key UP

5

AR2119

AR2119

• Open the door outwards

When closing the door ensure the door catches are fully engaged.

4. CHANGING THE STUDIO BATTERIES

The appliance batteries are located behind the wall switch plate.

•Undo the two screws securing the wall switch and plate and remove, Diagram 6

6

AR1887

•Correctly position the four new AA size batteries

•Re-assemble the battery holder as shown in Diagram 7

•Ensure the touch pad cable is tucked to the left on fitting the wall plate back onto the wall, Diagram 7

PLEASE ENSURE NO WIRES ARE TRAPPED BEFORE REPLACING THE WALL PLATE. THE TOUCH PAD LEAD IS EASILY DAMAGED.

6