Samsung VR20H9050UW/EN, VR20H9050UW/ET Using the remote control, Power/Recharging, Cleaning mode

Using the remote control

1 Power/Recharging

[A Type]	[B Type]
Power	Turn POWERbot's power on/off
Recharging	Select to recharge POWERbot at the charger while it
	is in cleaning process

2 Cleaning mode

Auto clean	Select to automatically clean the entire space once
Spot clean	Select to clean a localized area intensely
Max clean	Select to make POWERbot to clean until battery
	indicator flashes after reaching down to one level
Manual clean	Select to manually control and clean by using the
	remote control
Start/Stop	Select to start or stop cleaning process

3 Additional function

Silence mode	Select to clean with lower operation noise
	✻✻Turbo mode is not available
	In Auto clean mode
	▶▶When dust intake is detected, suction of
Dust sensor	POWERbot will become stronger and it will move
	around that area to focuses on cleaning the
mode	surrounding area.
	In Spot/Max/Manual clean
	▶▶When dust intake is detected, suction of
	POWERbot will become stronger.
Sound	Each time you press this button, Sound Effects →
	Mute is selected in this sequence.
	✻✻Remote control function NOT supported.

Inserting batteries

Open the battery cover by lifting it up while pressing the locking tab and insert the batteries as shown in the illustration. Then, close the cover until it clicks into place.

ENGLISH-16