D1265 Owner's Manual Part I: Security System Basics
How Your System Reports Alarms
Your security system might be programmed to automatically seize your telephones when sending reports to your security company. Once the report is completed, your security system restores the telephone line to normal operation (check with your security company). Other methods of communicating alarm conditions are also available. Please consult your security company for services available in your area.
Your system makes repeated attempts to send reports to your security company.
In the event your security system fails to communicate, the keypad sounds a Trouble Tone and shows Comm Fail Route Grp1 (where the Route Group can be 1, 2, 3, or 4):
Notify your security company of the communications failure.
If your system uses telephone lines as its means of communication and telephone service is interrupted, your security system cannot send reports to your security company unless it has an alternate means of transmitting them.
14 | Bosch Security Systems, Inc. 9/10 |