Bosch Appliances D1265 owner manual Master Arm CMD +, Description, Using Master Arm

Page 19

D1265 Owner's Manual Part II: System Commands

Master Arm (CMD + 1)

Description

Use this function to turn on both the perimeter and interior of a single area indicated on the first line (top) of the keypad display. When you turn the system on, the display shows how many seconds of exit delay time you have to exit the protected area. You should leave before exit delay time expires.

Leaving after exit delay has expired causes the entry delay to start if the person exits through a point designated Entry/Exit door. Exiting through any other point could cause an immediate alarm. Moving into the interior of the protected area causes an alarm on an interior device. If an alarm occurs, enter your personal passcode to disarm the system.

Your cleaning service, a serviceman, or others might also use this function to turn on your system when they leave.

Using Master Arm

5.If your system is programmed to require a passcode when performing a CMD 1, the display prompts you to enter your passcode.

The passcode is shown as asterisks (*).

6.If the passcode has valid authority for this command, the display shows Exit Now! # (# = exit delay time remaining) seconds remaining.

Using the CMD+1 command only arms the area currently displayed on the top line of the keypad display. For example, if the keypad is assigned to AREA 1 WAREHOUSE, only AREA 1 WAREHOUSE arms when CMD+1 is pressed.

1.Ensure your keypad shows idle text.

2.Press the CMD button.

3.The display shows *System Command*.

4.Press the 1 button.

After the exit delay time expires, the display changes to idle armed text.

7.To disarm your security system, enter your personal passcode and press ENTER.

Bosch Security Systems, Inc. 9/10 F01U169130-02

19

Image 19

Contents D1265 Page Contents Bosch Security Systems, Inc /10 F01U169130-02 Figures Your Keypad IntroductionCommand Enter buttons Using the keypadPoints Non-Fire Points Fire PointsYour Custom Display Priority of Events View Faulted or Bypassed PointsTo Scroll Faulted or Bypassed Points Keypad Quiets for Button pressesSilencing Fire Alarms Fire AlarmsSilencing Fire Trouble and Fire Supervisory conditions Burglary AlarmsSilencing Burglary Alarms Fire Trouble and Fire Supervisory EventsNon-Fire Trouble and Supervisory Events Silencing an AlarmSpecial System Trouble Display How Your System Reports Alarms Part II System Commands To Turn Your Security System On Arm Passcode Protected Commands and Functions Turning the System On Arming Turning the System Off DisarmingTurning On the System Arming With Doors or Windows Open Turning On the System Arming With a Duress PasscodeBosch Security Systems, Inc /10 F01U169130-02 Master Arm CMD + Using Master ArmDescription Master Arming all Areas Perimeter Instant CMD + Turn On the Perimeter With No Delays DescriptionUsing Perimeter Instant Master Arm Instant CMD + 1 +Turn On the Perimeter With Delays Description Perimeter Delay CMD +Using Perimeter Delay Silence Trouble Sound/Clear Trouble Display CMD + View Alarm Memory CMD + 4 +Using CMD Using View Alarm MemoryWalk Test CMD + 4 + Using Walk TestUsing Reset Sensors Reset Sensors CMD + 4 +Using Watch Mode Watch Mode CMD +Entering Watch Mode Perimeter Partial CMD + Using Perimeter PartialPartially Turn On the Perimeter Description Special Alerts CMD + 7 and CMD + Using Command Terms Used in This Section Advanced CommandsBypass a Point CMD + Using Bypass a PointBosch Security Systems, Inc /10 F01U169130-02 Unbypass a Point CMD + 0 + Using Unbypass a PointSend Report CMD + 4+1 or 4+2 Using Send ReportFor systems without a phone number Remote Program CMD + 4 +For systems with a network connection For systems with a phone number configuredChange Time/Date CMD + 4 + Set Date button disappears when the first digit is entered Door Status Using Door ControlDoor Control CMD + 4 + Cycle DoorSecure Door Unlock DoorAccess Level Extend Closing CMD + 5 + Change Display CMD + 4 +Show Continuous Time/Date Bosch Security Systems, Inc /10 F01U169130-02 Chg Skeds CMD + 5 + Using Chg SkedsSked Table Delete User CMD + 5 + Change Relay CMD + 5 + Using Change PasscodeChange Passcode CMD + 5 + Add/Change User CMD + 5 + Page User 3 is used here as an example Add/Change PasscodeBosch Security Systems, Inc /10 F01U169130-02 Add/Change Level Adding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Using Fire Test Default Text CMD + 5 +Fire Test CMD + 5 + Bosch Security Systems, Inc /10 F01U169130-02 Display Rev CMD + 5 + Service Menu 9 + 9 + EnterUsing Print Log Using View LogUsing Display Revision Using Default Text Keypad Setup MenuView Area Status Working with Multiple Areas from a Single KeypadScreen Area Definitions View Point StatusTurning On the System Move To Area CMD + 5 +Turning on Selected Areas Turning on Multiple Areas with a Passcode Faulted Points in Other AreasTurning on All or Selected Areas Turn On the Entire System Without DelaysTurning Off Multiple Areas with a Passcode Turning Off the SystemTurning Off Multiple Areas with Disarm All Turning Off Selected Areas User Interface Supplementary Information for Adding PasscodesUser Authority Levels Passcode WorksheetAuthority Levels User Passcode Worksheet User 000 to ### User Passcode Worksheet User 039 to Bosch Security Systems, Inc /10 F01U169130-02 User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc /10 F01U169130-02 Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 User Passcode Worksheet Blank User Token Worksheet Blank Security System LimitationsView Fire Safety and EvacuationStandard Displays System Trouble Displays Hour Point Bypass Service PrinterService D9210 Service Zonex Bus 1 orSecurity System Glossary How to Clean the Keypad Maintenance and ServiceYour Alarm Company Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc Perinton Parkway Fairport, NY