D1265 Owner's Manual Appendix
Standard Displays
Your keypad uses standard and custom displays to show the status of the security system. Many standard displays are described below. Your system might not use all of them. Descriptions of your custom text follow.
*System Command*
Shows when you press the CMD button. The system is waiting for you to enter a one or two digit number to complete the command.
Entry Delay/Enter Passcode to Disarm
When the system is turned on, entering through a delay door starts entry delay time.
The keypad emits a tweedle tone and alternates between Enter Passcode and press the ENTER button to disarm and AREA # AREA TEXT is in entry delay.
**No Authority**
The system will not recognize the passcode entered.
Perimeter On Delayed
Indicates that the perimeter is armed (turned on) with entry/exit delay time and shows Perimeter On Delayed. (Refer to Perimeter Delay (CMD + 3) on page 22).
Perimeter Instant
Indicates that the perimeter is armed (turned on) without entry/exit delay time and shows Perimeter On Instant. (Refer to Turn On the Perimeter With No Delays on page 21.).
You must turn off the system before entry delay time expires to avoid creating an alarm event.
Exit Now
Arming your system starts exit delay time. The keypad emits a repeating beep tone and shows Exit Now!.
Area must be disarmed first
Indicates that the function requested can only be performed when the area is disarmed. Disarm the area to perform the function.
86 | Bosch Security Systems, Inc. 9/10 |