Bosch Appliances D1265 Move To Area CMD + 5 +, Turning On the System, Turning on Selected Areas

Page 62

D1265 Owner's Manual Part IV: Multi-Area Use

Move To Area (CMD + 5 + 0)

With this function you can perform tasks in an area other than the one you’re in without having to physically go to that area. Your access to other areas is limited by the scope of the keypad and your authority level. For example, if your passcode gives you authority to all areas supported by the control panel, but the keypad you’re working with is limited in scope to areas 1 and 2, then you only can move to either area 1 or area 2.

Upon moving to another area, the range of tasks you might perform depends upon the keypad you’re working with. Once you have performed a task (such as Turning the Area On), the keypad reverts back to its programmed area after 10 sec. Thus only one task can be performed in another area at a time.

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 0 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Move To Area button, press it.

4.You might be prompted for your passcode. If so, enter your passcode and press the ENTER button. It appears on the display as asterisks (*).

The Exit button quits this function and return to idle text.

5.The keypad shows the Area Name Text of each area that falls within the scope of the keypad and authority level of the user, if applicable.

If the user's authority level will not permit access to a certain area and that area is not within the scope of the keypad, or the area is not enabled, it will not appear in the display.

If the area you wish to move to will not appear in this list, press the Next button to display additional areas.

To select an area, simply press the button corresponding to the Area Name.

6.Moving to…AREA 1 WAREHOUSE shows briefly, and then the text of the area you have moved to is shown (AREA 1 WAREHOUSE is used as an example here).

7.You are now able to perform tasks in this area. The number of areas to which you can move is limited by the scope of the keypad.

8.When you have completed all tasks in the area you have moved to, simply allow the keypad to time-out and revert to the area from which you started or enter the Move to Area function again.

Turning On the System

Turning on Selected Areas

Areas covered in the scope of the keypad can be armed individually by accessing the Master Arm function through the menu.

1.Press the Menu button to enter the function list.

2.Press the Next button repeatedly until you reach the Master Arm button, and then press it.

3.You might be prompted for your passcode. It appears on the display as asterisks (*).

62

Bosch Security Systems, Inc. 9/10 F01U169130-02

Page 61 Page 63
Image 62
Page 61 Page 63
Contents D1265 Page Contents Bosch Security Systems, Inc /10 F01U169130-02 Figures Introduction Your KeypadPoints Using the keypadCommand Enter buttons Fire Points Non-Fire PointsYour Custom Display Keypad Quiets for Button presses View Faulted or Bypassed PointsTo Scroll Faulted or Bypassed Points Priority of EventsFire Alarms Silencing Fire AlarmsFire Trouble and Fire Supervisory Events Burglary AlarmsSilencing Burglary Alarms Silencing Fire Trouble and Fire Supervisory conditionsSpecial System Trouble Display Silencing an AlarmNon-Fire Trouble and Supervisory Events How Your System Reports Alarms Part II System Commands Turning the System Off Disarming Passcode Protected Commands and FunctionsTurning the System On Arming To Turn Your Security System On ArmTurning On the System Arming With a Duress Passcode Turning On the System Arming With Doors or Windows OpenBosch Security Systems, Inc /10 F01U169130-02 Description Using Master ArmMaster Arm CMD + Master Arming all Areas Master Arm Instant CMD + 1 + Turn On the Perimeter With No Delays DescriptionUsing Perimeter Instant Perimeter Instant CMD +Using Perimeter Delay Perimeter Delay CMD +Turn On the Perimeter With Delays Description Using View Alarm Memory View Alarm Memory CMD + 4 +Using CMD Silence Trouble Sound/Clear Trouble Display CMD +Using Walk Test Walk Test CMD + 4 +Reset Sensors CMD + 4 + Using Reset SensorsEntering Watch Mode Watch Mode CMD +Using Watch Mode Partially Turn On the Perimeter Description Using Perimeter PartialPerimeter Partial CMD + Special Alerts CMD + 7 and CMD + Using Command Advanced Commands Terms Used in This SectionUsing Bypass a Point Bypass a Point CMD +Bosch Security Systems, Inc /10 F01U169130-02 Using Unbypass a Point Unbypass a Point CMD + 0 +Using Send Report Send Report CMD + 4+1 or 4+2Remote Program CMD + 4 + For systems without a phone numberFor systems with a phone number configured For systems with a network connectionChange Time/Date CMD + 4 + Set Date button disappears when the first digit is entered Cycle Door Using Door ControlDoor Control CMD + 4 + Door StatusUnlock Door Secure DoorAccess Level Show Continuous Time/Date Change Display CMD + 4 +Extend Closing CMD + 5 + Bosch Security Systems, Inc /10 F01U169130-02 Using Chg Skeds Chg Skeds CMD + 5 +Sked Table Delete User CMD + 5 + Change Passcode CMD + 5 + Using Change PasscodeChange Relay CMD + 5 + Add/Change User CMD + 5 + Page Add/Change Passcode User 3 is used here as an exampleBosch Security Systems, Inc /10 F01U169130-02 Add/Change Level Adding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Fire Test CMD + 5 + Default Text CMD + 5 +Using Fire Test Bosch Security Systems, Inc /10 F01U169130-02 Service Menu 9 + 9 + Enter Display Rev CMD + 5 +Using Display Revision Using View LogUsing Print Log Keypad Setup Menu Using Default TextWorking with Multiple Areas from a Single Keypad View Area StatusView Point Status Screen Area DefinitionsTurning on Selected Areas Move To Area CMD + 5 +Turning On the System Faulted Points in Other Areas Turning on Multiple Areas with a PasscodeTurn On the Entire System Without Delays Turning on All or Selected AreasTurning Off Multiple Areas with Disarm All Turning Off the SystemTurning Off Multiple Areas with a Passcode Turning Off Selected Areas Passcode Worksheet Supplementary Information for Adding PasscodesUser Authority Levels User InterfaceAuthority Levels User Passcode Worksheet User 000 to ### User Passcode Worksheet User 039 to Bosch Security Systems, Inc /10 F01U169130-02 User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc /10 F01U169130-02 Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 User Passcode Worksheet Blank Security System Limitations User Token Worksheet BlankFire Safety and Evacuation ViewStandard Displays System Trouble Displays Service Zonex Bus 1 or Service PrinterService D9210 Hour Point BypassSecurity System Glossary Your Alarm Company Maintenance and ServiceHow to Clean the Keypad Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc Perinton Parkway Fairport, NY

D1265 specifications

The Bosch Appliances D1265 dishwasher stands out as a testament to innovation, efficiency, and user-centric design in the ever-evolving landscape of home appliances. This model is characterized by its sleek and modern design, ensuring aesthetic integration with any kitchen decor.

One of the main features of the D1265 is its quiet operation. Operating at just 46 dB, it ranks among the quieter dishwashers available, allowing users to enjoy their kitchens without the disruptive noise typical of many other models. This is particularly valuable for open-concept living spaces, where sound can easily travel.

In addition to its quiet performance, the D1265 is designed for optimal cleaning efficiency. The dishwasher employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and check the progress of dishes throughout the wash cycle. This smart technology, combined with powerful spray arms and a filtration system, ensures that even heavily soiled pots and pans emerge spotless every time.

The appliance boasts multiple cycle options, including a quick wash setting that can clean lightly soiled dishes in just 30 minutes. Other options include heavy, auto, and Eco cycles, providing versatility to accommodate various needs and preferences. The Eco mode is particularly noteworthy as it emphasizes water and energy conservation without compromising cleaning performance.

The Bosch D1265 also features a flexible loading system, equipped with adjustable racks that can be configured to accommodate a wide range of dish sizes and shapes. The upper rack can be raised or lowered, while the lower rack comes with folding tines, making it easier to load larger items. This flexibility enhances the user experience and maximizes the capacity of the dishwasher.

Energy efficiency is a hallmark of Bosch appliances, and the D1265 is no exception. It is ENERGY STAR® certified, which means it meets rigorous efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps reduce energy bills but also contributes to a more sustainable household.

Furthermore, the D1265 design includes a stainless-steel tub, which is not only durable but also improves drying results through better heat retention. The model incorporates Bosch's advanced drying technology, ensuring that dishes are not just clean but also dry and ready to use right out of the machine.

In summary, the Bosch Appliances D1265 dishwasher combines quiet operation, advanced cleaning technologies, flexible loading options, and energy efficiency, making it a highly practical choice for modern households seeking reliability and performance in their kitchen appliances.
Top Page Image Contents