D1265 Owner's Manual Part II: System Commands
4.The display shows Perimeter On Instant.
After arming the perimeter without delays, you cannot enter or exit the premises without disarming the system. Opening a perimeter door before disarming generates an alarm. If this happens, silence the alarm by turning your system off and call your security company to let them know that it is not an emergency situation.
Perimeter Delay (CMD + 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only arm the perimeter and exit through a door programmed for exit delay. The interior of the building remains disarmed. People or pets are free to move throughout the interior of the premises.
This function is also useful in commercial systems when you are working before or after business hours and wish to have the perimeter armed. Other system users can enter through doors programmed for entry delay, which starts the entry delay sounder and countdown.
Using Perimeter Delay
Interior points are not armed with this command and might remain faulted while arming with COMMAND 3.
1.Press the CMD button.
2.The display shows *System Command*.
3.Press the 3 button.
If you prefer, you might use the function list in place of Steps 1 through 3 to initiate this function.
Press the Menu button to enter the function list.
Press the Next button repeatedly.
When you reach the Perimetr Arm Delay button, press it.
4.The display shows Exit Now! # seconds remaining (# = exit delay time remaining).
After the exit delay expires, Perimeter On Delayed is shown.
5.To disarm your security system, enter your personal passcode and press ENTER.
The display then returns to idle text.
22 | Bosch Security Systems, Inc. 9/10 |