D1265 Owner's Manual Part II: System Commands
Silence Trouble Sound/Clear Trouble Display (CMD + 4)
Description
Use CMD 4 to silence the trouble sounder during system events. This command also clears system messages from the display. If an alarm has occurred and was silenced, the *Alarm Silenced* display continues to scroll to remind you that cleared events can be seen with the View Alarm Memory function. Refer to View Alarm Memory (CMD + 4 + 0) on page 23 for more information.
Using CMD 4
The display shows disarmed idle text.
1.Press the CMD button. The display shows *System Command*.
2.Press the 4 button.
3.The keypad sounder is silenced.
View Alarm Memory (CMD + 4 + 0)
Description
Your system stores events that occurred since the last time memory was cleared. Use CMD 40 to view Alarm Memory.
Alarm Memory allows you or a service technician to review events after they are cleared from the keypad’s display. *Alarm Silenced* continues to scroll to remind you that events are stored in Event Memory.
Each time you turn the system on, the Event Memory is erased and the *Alarm Silenced* message is cleared.
Using View Alarm Memory
1.Ensure the display shows disarmed idle text.
2.Press the CMD button. The display shows *System Command*.
3.Press the 4 button and then the 0 button.
If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.
Press the Menu button to enter the function list.
Press Next button repeatedly.
When you reach the View Alarm Memory button, press it.
4.Your system shows event summary lines and point text in this order:
a.fire alarm summary line
b.point text for each fire alarm event
c.alarm summary line
d.point text for each alarm event
e.fire trouble summary line
f.point text for each fire trouble event
g.trouble summary line
h.point text for each trouble event
5.Press Next to scroll through the events.
Bosch Security Systems, Inc. 9/10 | 23 |