Bosch Appliances D1265 owner manual Display Rev CMD + 5 +, Service Menu 9 + 9 + Enter

Page 57
1. Ensure your keypad shows idle disarmed text.
2. Press the 9 button twice.
3. Press the ENTER button.
4. The display changes to show the service menu.
Service Walk Test appears on D9412GV2 and D9412GV3 control panels only.

D1265 Owner's Manual Part III: Advanced Commands

Display Rev (CMD + 5 + 9)

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 9 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Display Revision button, press it.

4.The display changes to *BOSCH D7412GV2*.

(D7412GV2 is used as an example, other control panels could be D9412GV3/D9412GV2, D7412GV3, D7212GV3/D7212GV2.)

5.The display returns to idle text after 5 sec.

Service Menu (9 + 9 + Enter)

The service menu is used to access the following commands:

View Log - Use this function to review events in your system at your keypad. Reviewing past events might help you identify problems. Viewing events will not require any additional equipment since the information is shown at your keypad. Events are stored in the control panel’s memory in order of occurrence and tagged with the date and time.

Print Log - The Print Log function lets you print the events stored in your security system’s log. You can choose to print the entire log or set a start date and print the events recorded from that date up to today. Your system must include a parallel printer interface and a printer to perform this function.

Display Rev (COMMAND + 5 + 9) - The command retrieves the control panel’s software version and display it.

Service Walk (D9412/D9112 only) – The command allows all the points on the system to be walk tested regardless of the type of point. For D7412GV3/D7412GV2 and D7212GV3/D7212GV2 Control Panels this function must be added to the keypad’s menu. Contact your security company for more information.

Default Text – This command shows the current state of the area for 3 sec before returning to idle text.

Keypad Programming - This optional command is only included in this menu when enabled and when all areas are disarmed. Access is restricted to the Service User only. Through this menu, you can change a limited selection of system configuration parameters. Consult your security company for details.

Bosch Security Systems, Inc. 9/10 F01U169130-02

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents D1265 Page Contents Bosch Security Systems, Inc /10 F01U169130-02 Figures Your Keypad IntroductionUsing the keypad Command Enter buttonsPoints Non-Fire Points Fire PointsYour Custom Display To Scroll Faulted or Bypassed Points View Faulted or Bypassed PointsKeypad Quiets for Button presses Priority of EventsSilencing Fire Alarms Fire AlarmsSilencing Burglary Alarms Burglary AlarmsFire Trouble and Fire Supervisory Events Silencing Fire Trouble and Fire Supervisory conditionsSilencing an Alarm Non-Fire Trouble and Supervisory EventsSpecial System Trouble Display How Your System Reports Alarms Part II System Commands Turning the System On Arming Passcode Protected Commands and FunctionsTurning the System Off Disarming To Turn Your Security System On ArmTurning On the System Arming With Doors or Windows Open Turning On the System Arming With a Duress PasscodeBosch Security Systems, Inc /10 F01U169130-02 Using Master Arm Master Arm CMD +Description Master Arming all Areas Using Perimeter Instant Turn On the Perimeter With No Delays DescriptionMaster Arm Instant CMD + 1 + Perimeter Instant CMD +Perimeter Delay CMD + Turn On the Perimeter With Delays DescriptionUsing Perimeter Delay Using CMD View Alarm Memory CMD + 4 +Using View Alarm Memory Silence Trouble Sound/Clear Trouble Display CMD +Walk Test CMD + 4 + Using Walk TestUsing Reset Sensors Reset Sensors CMD + 4 +Watch Mode CMD + Using Watch ModeEntering Watch Mode Using Perimeter Partial Perimeter Partial CMD +Partially Turn On the Perimeter Description Special Alerts CMD + 7 and CMD + Using Command Terms Used in This Section Advanced CommandsBypass a Point CMD + Using Bypass a PointBosch Security Systems, Inc /10 F01U169130-02 Unbypass a Point CMD + 0 + Using Unbypass a PointSend Report CMD + 4+1 or 4+2 Using Send ReportFor systems without a phone number Remote Program CMD + 4 +For systems with a network connection For systems with a phone number configuredChange Time/Date CMD + 4 + Set Date button disappears when the first digit is entered Door Control CMD + 4 + Using Door ControlCycle Door Door StatusSecure Door Unlock DoorAccess Level Change Display CMD + 4 + Extend Closing CMD + 5 +Show Continuous Time/Date Bosch Security Systems, Inc /10 F01U169130-02 Chg Skeds CMD + 5 + Using Chg SkedsSked Table Delete User CMD + 5 + Using Change Passcode Change Relay CMD + 5 +Change Passcode CMD + 5 + Add/Change User CMD + 5 + Page User 3 is used here as an example Add/Change PasscodeBosch Security Systems, Inc /10 F01U169130-02 Add/Change Level Adding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Default Text CMD + 5 + Using Fire TestFire Test CMD + 5 + Bosch Security Systems, Inc /10 F01U169130-02 Display Rev CMD + 5 + Service Menu 9 + 9 + EnterUsing View Log Using Print LogUsing Display Revision Using Default Text Keypad Setup MenuView Area Status Working with Multiple Areas from a Single KeypadScreen Area Definitions View Point StatusMove To Area CMD + 5 + Turning On the SystemTurning on Selected Areas Turning on Multiple Areas with a Passcode Faulted Points in Other AreasTurning on All or Selected Areas Turn On the Entire System Without DelaysTurning Off the System Turning Off Multiple Areas with a PasscodeTurning Off Multiple Areas with Disarm All Turning Off Selected Areas User Authority Levels Supplementary Information for Adding PasscodesPasscode Worksheet User InterfaceAuthority Levels User Passcode Worksheet User 000 to ### User Passcode Worksheet User 039 to Bosch Security Systems, Inc /10 F01U169130-02 User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc /10 F01U169130-02 Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 User Passcode Worksheet Blank User Token Worksheet Blank Security System LimitationsView Fire Safety and EvacuationStandard Displays System Trouble Displays Service D9210 Service PrinterService Zonex Bus 1 or Hour Point BypassSecurity System Glossary Maintenance and Service How to Clean the KeypadYour Alarm Company Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc Perinton Parkway Fairport, NY

D1265 specifications

The Bosch Appliances D1265 dishwasher stands out as a testament to innovation, efficiency, and user-centric design in the ever-evolving landscape of home appliances. This model is characterized by its sleek and modern design, ensuring aesthetic integration with any kitchen decor.

One of the main features of the D1265 is its quiet operation. Operating at just 46 dB, it ranks among the quieter dishwashers available, allowing users to enjoy their kitchens without the disruptive noise typical of many other models. This is particularly valuable for open-concept living spaces, where sound can easily travel.

In addition to its quiet performance, the D1265 is designed for optimal cleaning efficiency. The dishwasher employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and check the progress of dishes throughout the wash cycle. This smart technology, combined with powerful spray arms and a filtration system, ensures that even heavily soiled pots and pans emerge spotless every time.

The appliance boasts multiple cycle options, including a quick wash setting that can clean lightly soiled dishes in just 30 minutes. Other options include heavy, auto, and Eco cycles, providing versatility to accommodate various needs and preferences. The Eco mode is particularly noteworthy as it emphasizes water and energy conservation without compromising cleaning performance.

The Bosch D1265 also features a flexible loading system, equipped with adjustable racks that can be configured to accommodate a wide range of dish sizes and shapes. The upper rack can be raised or lowered, while the lower rack comes with folding tines, making it easier to load larger items. This flexibility enhances the user experience and maximizes the capacity of the dishwasher.

Energy efficiency is a hallmark of Bosch appliances, and the D1265 is no exception. It is ENERGY STAR® certified, which means it meets rigorous efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps reduce energy bills but also contributes to a more sustainable household.

Furthermore, the D1265 design includes a stainless-steel tub, which is not only durable but also improves drying results through better heat retention. The model incorporates Bosch's advanced drying technology, ensuring that dishes are not just clean but also dry and ready to use right out of the machine.

In summary, the Bosch Appliances D1265 dishwasher combines quiet operation, advanced cleaning technologies, flexible loading options, and energy efficiency, making it a highly practical choice for modern households seeking reliability and performance in their kitchen appliances.
Top Page Image Contents