D1265 Owner's Manual Part III: Advanced Commands
If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.
Press the Menu button to enter the function list.
Press the Next button repeatedly.
When you reach the Remote Program button, press it.
Press ENTER.
4.Select RPS via Network.
5.Do one of the following:
My system uses the default port number for network connection. Press Use Port
### and then skip to Step 7.
My system uses an alternate port number for network connection: _____________.
Change Time/Date (CMD + 4 + 5)
The time and date in your system must be correct for scheduled events to occur at the correct times. Check the time at least once a month to ensure accuracy. Use this function to set both the time and date. The system uses a
1.Ensure your keypad shows idle disarmed text.
2.Press the CMD button. The display shows *System Command*.
6.Select the Enter Port Number option and enter the port number specified.
7.The security system now connects to the IP Address specified for network connection during the remote programming session.
8.At the conclusion of the programming session your system sends a report to the security company and then returns the display to idle text.
3.Press the 4 and then the 5 button.
If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.
Press the Menu button to enter the function list.
Press the Next button repeatedly.
When you reach the Change Time/Date button, press it.
4.The display shows Enter new time.
To just change the date, press the Set Date button. Refer to Step 6.
If you input the wrong time, press the Exit button to clear the time.
Bosch Security Systems, Inc. 9/10 | 37 |