Bosch Appliances D1265 owner manual Send Report CMD + 4+1 or 4+2, Using Send Report

Page 34

D1265 Owner's Manual Part III: Advanced Commands

No additional points indicates that there are no more points that can be bypassed.

If an unbypassed point is entered, an error tone will sound and a warning will be displayed.

The display returns to idle text.

7.If you are attempting to unbypass a 24-Hour or Fire Point that is still faulted, the keypad shows Cannot unbypass 24hr faulted points.

Send Report (CMD + 4+1 or 4+2)

Description

This function tests the communication link between your security system and your security company. It is an important part of maintaining a high level of security for your property.

Two types of test reports can be sent. The first type of report is a simple test report (Command 41). The second type of report is a status report (Command 42). This status report indicates the current condition of your system.

Using Send Report

1.Always call your security company before sending a test report.

2.Ensure the display shows disarmed idle text.

3.Press the CMD button. The display shows *System Command*.

4.Press the 4 button then the 1 button to send a test report.

Press the 4 button then the 2 button to send a status report.

If you prefer, you might use the function list in place of Steps 3 and 4 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Send Report button, press it.

Another menu appears allowing for the selection of sending a test report (Test Rpt) or a status report (Status Rpt).

Press either button.

5.The keypad shows Sending report… Please wait… until the report is transmitted to the security company.

34	Bosch Security Systems, Inc. 9/10 F01U169130-02

Image 34

Contents D1265 Page Contents Bosch Security Systems, Inc /10 F01U169130-02 Figures Introduction Your KeypadCommand Enter buttons Using the keypadPoints Fire Points Non-Fire PointsYour Custom Display Keypad Quiets for Button presses View Faulted or Bypassed PointsTo Scroll Faulted or Bypassed Points Priority of EventsFire Alarms Silencing Fire AlarmsFire Trouble and Fire Supervisory Events Burglary AlarmsSilencing Burglary Alarms Silencing Fire Trouble and Fire Supervisory conditionsNon-Fire Trouble and Supervisory Events Silencing an AlarmSpecial System Trouble Display How Your System Reports Alarms Part II System Commands Turning the System Off Disarming Passcode Protected Commands and FunctionsTurning the System On Arming To Turn Your Security System On ArmTurning On the System Arming With a Duress Passcode Turning On the System Arming With Doors or Windows OpenBosch Security Systems, Inc /10 F01U169130-02 Master Arm CMD + Using Master ArmDescription Master Arming all Areas Master Arm Instant CMD + 1 + Turn On the Perimeter With No Delays DescriptionUsing Perimeter Instant Perimeter Instant CMD +Turn On the Perimeter With Delays Description Perimeter Delay CMD +Using Perimeter Delay Using View Alarm Memory View Alarm Memory CMD + 4 +Using CMD Silence Trouble Sound/Clear Trouble Display CMD +Using Walk Test Walk Test CMD + 4 +Reset Sensors CMD + 4 + Using Reset SensorsUsing Watch Mode Watch Mode CMD +Entering Watch Mode Perimeter Partial CMD + Using Perimeter PartialPartially Turn On the Perimeter Description Special Alerts CMD + 7 and CMD + Using Command Advanced Commands Terms Used in This Section Using Bypass a Point Bypass a Point CMD +Bosch Security Systems, Inc /10 F01U169130-02 Using Unbypass a Point Unbypass a Point CMD + 0 +Using Send Report Send Report CMD + 4+1 or 4+2Remote Program CMD + 4 + For systems without a phone numberFor systems with a phone number configured For systems with a network connectionChange Time/Date CMD + 4 + Set Date button disappears when the first digit is entered Cycle Door Using Door ControlDoor Control CMD + 4 + Door StatusUnlock Door Secure DoorAccess Level Extend Closing CMD + 5 + Change Display CMD + 4 +Show Continuous Time/Date Bosch Security Systems, Inc /10 F01U169130-02 Using Chg Skeds Chg Skeds CMD + 5 +Sked Table Delete User CMD + 5 + Change Relay CMD + 5 + Using Change PasscodeChange Passcode CMD + 5 + Add/Change User CMD + 5 + Page Add/Change Passcode User 3 is used here as an exampleBosch Security Systems, Inc /10 F01U169130-02 Add/Change Level Adding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Using Fire Test Default Text CMD + 5 +Fire Test CMD + 5 + Bosch Security Systems, Inc /10 F01U169130-02 Service Menu 9 + 9 + Enter Display Rev CMD + 5 +Using Print Log Using View LogUsing Display Revision Keypad Setup Menu Using Default TextWorking with Multiple Areas from a Single Keypad View Area StatusView Point Status Screen Area DefinitionsTurning On the System Move To Area CMD + 5 +Turning on Selected Areas Faulted Points in Other Areas Turning on Multiple Areas with a PasscodeTurn On the Entire System Without Delays Turning on All or Selected AreasTurning Off Multiple Areas with a Passcode Turning Off the SystemTurning Off Multiple Areas with Disarm All Turning Off Selected Areas Passcode Worksheet Supplementary Information for Adding PasscodesUser Authority Levels User InterfaceAuthority Levels User Passcode Worksheet User 000 to ### User Passcode Worksheet User 039 to Bosch Security Systems, Inc /10 F01U169130-02 User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc /10 F01U169130-02 Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 User Passcode Worksheet Blank Security System Limitations User Token Worksheet BlankFire Safety and Evacuation ViewStandard Displays System Trouble Displays Service Zonex Bus 1 or Service PrinterService D9210 Hour Point BypassSecurity System Glossary How to Clean the Keypad Maintenance and ServiceYour Alarm Company Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc Perinton Parkway Fairport, NY