Bosch Appliances D1265 owner manual Change Display CMD + 4 +, Extend Closing CMD + 5 +

Page 42

D1265 Owner's Manual Part III: Advanced Commands

Change Display (CMD + 4 + 9)

Show Continuous Time/Date

Use this function to replace the disarmed idle text with a continuous time and date display and to prevent a passersby from knowing the status of your system.

Any time your keypad has an event to display, the time and date display is automatically removed. To return the time and date display, you must perform this function again.

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 4 and then the 9 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Change Display button, press it.

4.Select Time/Date Display. The display will return to idle and the area status will be replaced with the Time and Date.

The Bright Display and Dim Display options are not supported on the D1265 keypad.

Extend Closing (CMD + 5 + 1)

Your system might be programmed to expect you to arm within a scheduled closing window, which is a duration of time that is programmed by your alarm company. Your system might also be programmed to automatically arm at the end of the window.

CMD 51 lets you extend the scheduled closing window time either prior to the closing window time or during the closing window time. Use this function when you expect to stay past the scheduled end of the closing window. Your alarm company sets the length of time prior to the start of the closing window in which you are allowed to extend the closing window.

Close window is not currently active shows during the time when the keypad won’t allow the window to be extended.

At the beginning of the closing window, the keypad beeps and shows Please Close Now to remind you to arm your system. It remains on the display until you arm, the close window ends, or you extend closing.

The closing window can only be extended once the window has started.

Alarm or trouble messages replace this message in the event of an alarm or trouble condition.

Pressing the Silence button silences the beep and clear the message for 10 minutes.

If the alarm or trouble condition clears before the end of the close window Please Close Now message returns to the keypad display.

42

Bosch Security Systems, Inc. 9/10 F01U169130-02

Page 41 Page 43
Image 42
Page 41 Page 43
Contents D1265 Page Contents Bosch Security Systems, Inc /10 F01U169130-02 Figures Introduction Your KeypadUsing the keypad Command Enter buttonsPoints Fire Points Non-Fire PointsYour Custom Display Keypad Quiets for Button presses View Faulted or Bypassed PointsTo Scroll Faulted or Bypassed Points Priority of EventsFire Alarms Silencing Fire AlarmsFire Trouble and Fire Supervisory Events Burglary AlarmsSilencing Burglary Alarms Silencing Fire Trouble and Fire Supervisory conditionsSilencing an Alarm Non-Fire Trouble and Supervisory EventsSpecial System Trouble Display How Your System Reports Alarms Part II System Commands Turning the System Off Disarming Passcode Protected Commands and FunctionsTurning the System On Arming To Turn Your Security System On ArmTurning On the System Arming With a Duress Passcode Turning On the System Arming With Doors or Windows OpenBosch Security Systems, Inc /10 F01U169130-02 Using Master Arm Master Arm CMD +Description Master Arming all Areas Master Arm Instant CMD + 1 + Turn On the Perimeter With No Delays DescriptionUsing Perimeter Instant Perimeter Instant CMD +Perimeter Delay CMD + Turn On the Perimeter With Delays DescriptionUsing Perimeter Delay Using View Alarm Memory View Alarm Memory CMD + 4 +Using CMD Silence Trouble Sound/Clear Trouble Display CMD +Using Walk Test Walk Test CMD + 4 +Reset Sensors CMD + 4 + Using Reset SensorsWatch Mode CMD + Using Watch ModeEntering Watch Mode Using Perimeter Partial Perimeter Partial CMD +Partially Turn On the Perimeter Description Special Alerts CMD + 7 and CMD + Using Command Advanced Commands Terms Used in This SectionUsing Bypass a Point Bypass a Point CMD +Bosch Security Systems, Inc /10 F01U169130-02 Using Unbypass a Point Unbypass a Point CMD + 0 +Using Send Report Send Report CMD + 4+1 or 4+2Remote Program CMD + 4 + For systems without a phone numberFor systems with a phone number configured For systems with a network connectionChange Time/Date CMD + 4 + Set Date button disappears when the first digit is entered Cycle Door Using Door ControlDoor Control CMD + 4 + Door StatusUnlock Door Secure DoorAccess Level Change Display CMD + 4 + Extend Closing CMD + 5 +Show Continuous Time/Date Bosch Security Systems, Inc /10 F01U169130-02 Using Chg Skeds Chg Skeds CMD + 5 +Sked Table Delete User CMD + 5 + Using Change Passcode Change Relay CMD + 5 +Change Passcode CMD + 5 + Add/Change User CMD + 5 + Page Add/Change Passcode User 3 is used here as an exampleBosch Security Systems, Inc /10 F01U169130-02 Add/Change Level Adding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Default Text CMD + 5 + Using Fire TestFire Test CMD + 5 + Bosch Security Systems, Inc /10 F01U169130-02 Service Menu 9 + 9 + Enter Display Rev CMD + 5 +Using View Log Using Print LogUsing Display Revision Keypad Setup Menu Using Default TextWorking with Multiple Areas from a Single Keypad View Area StatusView Point Status Screen Area DefinitionsMove To Area CMD + 5 + Turning On the SystemTurning on Selected Areas Faulted Points in Other Areas Turning on Multiple Areas with a PasscodeTurn On the Entire System Without Delays Turning on All or Selected AreasTurning Off the System Turning Off Multiple Areas with a PasscodeTurning Off Multiple Areas with Disarm All Turning Off Selected Areas Passcode Worksheet Supplementary Information for Adding PasscodesUser Authority Levels User InterfaceAuthority Levels User Passcode Worksheet User 000 to ### User Passcode Worksheet User 039 to Bosch Security Systems, Inc /10 F01U169130-02 User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc /10 F01U169130-02 Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 User Passcode Worksheet Blank Security System Limitations User Token Worksheet BlankFire Safety and Evacuation ViewStandard Displays System Trouble Displays Service Zonex Bus 1 or Service PrinterService D9210 Hour Point BypassSecurity System Glossary Maintenance and Service How to Clean the KeypadYour Alarm Company Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc Perinton Parkway Fairport, NY

D1265 specifications

The Bosch Appliances D1265 dishwasher stands out as a testament to innovation, efficiency, and user-centric design in the ever-evolving landscape of home appliances. This model is characterized by its sleek and modern design, ensuring aesthetic integration with any kitchen decor.

One of the main features of the D1265 is its quiet operation. Operating at just 46 dB, it ranks among the quieter dishwashers available, allowing users to enjoy their kitchens without the disruptive noise typical of many other models. This is particularly valuable for open-concept living spaces, where sound can easily travel.

In addition to its quiet performance, the D1265 is designed for optimal cleaning efficiency. The dishwasher employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and check the progress of dishes throughout the wash cycle. This smart technology, combined with powerful spray arms and a filtration system, ensures that even heavily soiled pots and pans emerge spotless every time.

The appliance boasts multiple cycle options, including a quick wash setting that can clean lightly soiled dishes in just 30 minutes. Other options include heavy, auto, and Eco cycles, providing versatility to accommodate various needs and preferences. The Eco mode is particularly noteworthy as it emphasizes water and energy conservation without compromising cleaning performance.

The Bosch D1265 also features a flexible loading system, equipped with adjustable racks that can be configured to accommodate a wide range of dish sizes and shapes. The upper rack can be raised or lowered, while the lower rack comes with folding tines, making it easier to load larger items. This flexibility enhances the user experience and maximizes the capacity of the dishwasher.

Energy efficiency is a hallmark of Bosch appliances, and the D1265 is no exception. It is ENERGY STAR® certified, which means it meets rigorous efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps reduce energy bills but also contributes to a more sustainable household.

Furthermore, the D1265 design includes a stainless-steel tub, which is not only durable but also improves drying results through better heat retention. The model incorporates Bosch's advanced drying technology, ensuring that dishes are not just clean but also dry and ready to use right out of the machine.

In summary, the Bosch Appliances D1265 dishwasher combines quiet operation, advanced cleaning technologies, flexible loading options, and energy efficiency, making it a highly practical choice for modern households seeking reliability and performance in their kitchen appliances.
Top Page Image Contents