D1265 Owner's Manual Part III: Advanced Commands
Add/Change Card | Add/Change |
1.Pressing the Card button allows you to add/change a user’s access card or credential.
2.The display changes to either one of the following depending on if an access card exists for the user:
User 123 Add Access Card for this user - if no access card exists for that user.
Pressing the Yes button jumps to Step 3.
Pressing the No button jumps to the
Add/Change Level screen.
User 123 Change this user’s Access Card - if an access card already exists for this user and you wish to change it. (In both cases, 123 is used as an example).
Pressing the Yes button jumps to Step 3.
Pressing the No button jumps to Add/Change Level.
3.If a card reader is connected to your system, the display changes to Present card to card reader now.
If the display changes to D9210 not ready, contact your security company.
Pressing the Exit button exits from this function and returns the display to idle text.
4.If the card you are trying to add to the system already exists, an error tone sounds and the display changes to Card already exists. Please try again.
Then the display returns to Present card to card reader now.
5.If the card is accepted, the display changes to either Card added or Card changed if the card already exists in your system.
Pressing the Next button exits from this function and returns the display to Add/Change Level.
For each user in the control panel with access control, there can be up to four access cards; one Master User (assigned in the Card prompt) and up to three sub- users.
1.Pressing the
2.The display changes to Add/Change
Pressing the Yes button jumps to Step 3.
Pressing the No button jumps to Add/Change Passcode.
3.The display changes to Select
Press the
Press the
Press the
Press the Exit button to return to the main Add / Change User display.
4.If adding or changing a
If the display changes to D9210 not ready, contact your security company.
If 20 sec elapse without pressing a button the display returns to idle text. Pressing the Exit button exits from this function and returns the display to the main Add / Change User display.
5.If the card you are trying to add to the system already exists, an error tone sounds and the display changes to Card already exists. Please try again.
If 20 sec elapse without pressing a button returns the display to idle text. Pressing the Exit button exits from this function and returns the display to the main Add / Change User display.
Press the Exit button to exit from this function and return the display to idle text.
54 | Bosch Security Systems, Inc. 9/10 |