Bosch Appliances D1265 owner manual Default Text CMD + 5 +, Fire Test CMD + 5 +, Using Fire Test

Page 55

D1265 Owner's Manual Part III: Advanced Commands

6.If the card is accepted, the display changes to either Card added or Card changed if the card already exists in your system.

Pressing the Exit button exits from this function and returns the display to the main Add / Change User display.

Pressing the Next button exits from this function and returns the display to Add/Change Passcode depending on if a passcode already exists for the user.

Default Text (CMD + 5 + 7)

This function allows the current state of the area for 3 sec before returning to idle text.

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 7 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Default Text button, press it.

4.The current state of the area is shown for 3 sec before returning to idle text.

Fire Test (CMD + 5 + 8)

Use this function to test fire points and other 24-hour points to be certain they function properly. You can review both the tested and untested points at your keypad to help pinpoint any problems.

Upon initiation, the fire test tests the fire bell pattern on the bell output and ring the keypad fire bell for 2 sec. The AC is disabled for 4 minutes in order to test the system’s battery power. If the battery cannot maintain the system for the 4-minute period, the keypad appears to power off. If this happens, contact your security company. At the end of the 4-minute period, AC is returned to the system and the control panel restores. A message is sent to your security company upon initiation and completion of the Fire Test. During the Fire Test, no 24-hour alarms are sent to your security company.

If there is no activity on the system for 20 minutes, the system automatically exits from the Fire Test.

Any 24-hour points left in a faulted condition at the end of the test are automatically removed from service by bypassing them. Once the 24-hour device is reset to normal, use the Unbypass command (refer to Unbypass A Point (CMD + 0 + 0) on page 33) to return them to service.

Using Fire Test

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 8 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Fire Walk Test button, press it.

Bosch Security Systems, Inc. 9/10 F01U169130-02

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents D1265 Page Contents Bosch Security Systems, Inc /10 F01U169130-02 Figures Your Keypad IntroductionCommand Enter buttons Using the keypadPoints Non-Fire Points Fire PointsYour Custom Display Priority of Events View Faulted or Bypassed PointsTo Scroll Faulted or Bypassed Points Keypad Quiets for Button pressesSilencing Fire Alarms Fire AlarmsSilencing Fire Trouble and Fire Supervisory conditions Burglary AlarmsSilencing Burglary Alarms Fire Trouble and Fire Supervisory EventsNon-Fire Trouble and Supervisory Events Silencing an AlarmSpecial System Trouble Display How Your System Reports Alarms Part II System Commands To Turn Your Security System On Arm Passcode Protected Commands and FunctionsTurning the System On Arming Turning the System Off DisarmingTurning On the System Arming With Doors or Windows Open Turning On the System Arming With a Duress PasscodeBosch Security Systems, Inc /10 F01U169130-02 Master Arm CMD + Using Master ArmDescription Master Arming all Areas Perimeter Instant CMD + Turn On the Perimeter With No Delays DescriptionUsing Perimeter Instant Master Arm Instant CMD + 1 +Turn On the Perimeter With Delays Description Perimeter Delay CMD +Using Perimeter Delay Silence Trouble Sound/Clear Trouble Display CMD + View Alarm Memory CMD + 4 +Using CMD Using View Alarm MemoryWalk Test CMD + 4 + Using Walk TestUsing Reset Sensors Reset Sensors CMD + 4 +Using Watch Mode Watch Mode CMD +Entering Watch Mode Perimeter Partial CMD + Using Perimeter PartialPartially Turn On the Perimeter Description Special Alerts CMD + 7 and CMD + Using Command Terms Used in This Section Advanced CommandsBypass a Point CMD + Using Bypass a PointBosch Security Systems, Inc /10 F01U169130-02 Unbypass a Point CMD + 0 + Using Unbypass a PointSend Report CMD + 4+1 or 4+2 Using Send ReportFor systems without a phone number Remote Program CMD + 4 +For systems with a network connection For systems with a phone number configuredChange Time/Date CMD + 4 + Set Date button disappears when the first digit is entered Door Status Using Door ControlDoor Control CMD + 4 + Cycle DoorSecure Door Unlock DoorAccess Level Extend Closing CMD + 5 + Change Display CMD + 4 +Show Continuous Time/Date Bosch Security Systems, Inc /10 F01U169130-02 Chg Skeds CMD + 5 + Using Chg SkedsSked Table Delete User CMD + 5 + Change Relay CMD + 5 + Using Change PasscodeChange Passcode CMD + 5 + Add/Change User CMD + 5 + Page User 3 is used here as an example Add/Change PasscodeBosch Security Systems, Inc /10 F01U169130-02 Add/Change Level Adding/Changing a User’s Name Add/Change Card Add/Change Sub-User ID Using Fire Test Default Text CMD + 5 +Fire Test CMD + 5 + Bosch Security Systems, Inc /10 F01U169130-02 Display Rev CMD + 5 + Service Menu 9 + 9 + EnterUsing Print Log Using View LogUsing Display Revision Using Default Text Keypad Setup MenuView Area Status Working with Multiple Areas from a Single KeypadScreen Area Definitions View Point StatusTurning On the System Move To Area CMD + 5 +Turning on Selected Areas Turning on Multiple Areas with a Passcode Faulted Points in Other AreasTurning on All or Selected Areas Turn On the Entire System Without DelaysTurning Off Multiple Areas with a Passcode Turning Off the SystemTurning Off Multiple Areas with Disarm All Turning Off Selected Areas User Interface Supplementary Information for Adding PasscodesUser Authority Levels Passcode WorksheetAuthority Levels User Passcode Worksheet User 000 to ### User Passcode Worksheet User 039 to Bosch Security Systems, Inc /10 F01U169130-02 User Area Authority ### Passcode Group User Name Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 115 Site Card Data User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc /10 F01U169130-02 Master ID ###-0 Sub-User ###-1 Sub-User ###-2 Sub-User ###-3 User Area Authority ### Passcode Group Bosch Security Systems, Inc /10 F01U169130-02 User Passcode Worksheet Blank User Token Worksheet Blank Security System LimitationsView Fire Safety and EvacuationStandard Displays System Trouble Displays Hour Point Bypass Service PrinterService D9210 Service Zonex Bus 1 orSecurity System Glossary How to Clean the Keypad Maintenance and ServiceYour Alarm Company Bosch Security Systems, Inc /10 F01U169130-02 Bosch Security Systems, Inc Perinton Parkway Fairport, NY

D1265 specifications

The Bosch Appliances D1265 dishwasher stands out as a testament to innovation, efficiency, and user-centric design in the ever-evolving landscape of home appliances. This model is characterized by its sleek and modern design, ensuring aesthetic integration with any kitchen decor.

One of the main features of the D1265 is its quiet operation. Operating at just 46 dB, it ranks among the quieter dishwashers available, allowing users to enjoy their kitchens without the disruptive noise typical of many other models. This is particularly valuable for open-concept living spaces, where sound can easily travel.

In addition to its quiet performance, the D1265 is designed for optimal cleaning efficiency. The dishwasher employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and check the progress of dishes throughout the wash cycle. This smart technology, combined with powerful spray arms and a filtration system, ensures that even heavily soiled pots and pans emerge spotless every time.

The appliance boasts multiple cycle options, including a quick wash setting that can clean lightly soiled dishes in just 30 minutes. Other options include heavy, auto, and Eco cycles, providing versatility to accommodate various needs and preferences. The Eco mode is particularly noteworthy as it emphasizes water and energy conservation without compromising cleaning performance.

The Bosch D1265 also features a flexible loading system, equipped with adjustable racks that can be configured to accommodate a wide range of dish sizes and shapes. The upper rack can be raised or lowered, while the lower rack comes with folding tines, making it easier to load larger items. This flexibility enhances the user experience and maximizes the capacity of the dishwasher.

Energy efficiency is a hallmark of Bosch appliances, and the D1265 is no exception. It is ENERGY STAR® certified, which means it meets rigorous efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps reduce energy bills but also contributes to a more sustainable household.

Furthermore, the D1265 design includes a stainless-steel tub, which is not only durable but also improves drying results through better heat retention. The model incorporates Bosch's advanced drying technology, ensuring that dishes are not just clean but also dry and ready to use right out of the machine.

In summary, the Bosch Appliances D1265 dishwasher combines quiet operation, advanced cleaning technologies, flexible loading options, and energy efficiency, making it a highly practical choice for modern households seeking reliability and performance in their kitchen appliances.
Top Page Image Contents