B. Additional Decorative Finishing up to 1 in. (25 mm) Thick
If an additional decorative facing is to be used (i.e. tile, marble) the front edge of the appliance must be 1/2 in. (13 mm) plus the thickness of the facing material (up to
1 in./25 mm thick) past the edge of the framing to achieve a flush fit with the
C. Additional Decorative Finishing over 1 in. (25 mm) Thick
If the additional decorative facing is to be used is over
1 in./25 mm thick (i.e. rock, brick, etc.) the front edge of the appliance must be 1/2 in. (12 mm) past the edge of the framing. The
Sheetrock 
1/2 in. 
Cement Board
Air Flow
Wood Framing
Steel Stud Assy
Use the instructions included with the template for instal- lation.
WARNING! Risk of Fire! DO NOT restrict the 1 in. air gap with any facing material!
Sheetrock 
Wood Framing
1/2 in. (13 mm) |
|
|
|
|
|
| |||
|
|
|
|
|
| ||||
Cement Board |
|
|
|
| Steel Stud Assy | ||||
|
|
|
| ||||||
Top Rock |
|
|
|
|
|
| |||
Template |
|
|
|
|
|
|
| ||
| Air Flow |
|
|
|
| ||||
|
|
|
|
| |||||
1 in. (25 mm) |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
air gap |
|
|
|
|
|
|
| ||
1 1/2 in. MAXIMUM
Figure 14.3 1/2 in. Sheetrock plus Wall Finishing to 1 in.
(shown for |
reference only) |
1/2 in. (13 mm) |
Figure 14.4 1/2 in. Sheetrock plus Wall Finishing over 1 in.
48 | Heat & Glo • LUX60 • |