INSTALLATION
VENTING ARRANGEMENTS
HORIZONTAL TERMINATION (FLEX)
Regency® Direct Vent System
These venting systems, in combination with the
FPI Direct Vent (Flex) System Termination Kits include all the parts needed to install the
FPI Kit # | Length | Contains: | |
4 Feet | 1) | 8” flexible liner (Kit length) | |
|
| 2) | 5” flexible liner (Kit length) |
|
| 3) | spring spacers |
6 Feet | 4) | thimble | |
|
| 5) | AstroCap termination cap |
|
| 6) | screws |
|
| 7) | tube of Mill Pac |
10 Feet | |||
|
| 8) | plated screws |
|
| 9) | S.S. screws #8 x |
|
| 10) | vinyl siding standoff |
|
|
|
|
Notes:
1) Liner sections should be continuous without any joints or seams.
2) Only Flex pipe purchased from FPI may be used for Flex installations.
3) Horizontal vent must be supported every 3 feet.
4) Awall thimble is mandatory for all horizontal terminations due to high temperatures.
INSTALLATION
Regency® | 15 |