MAINTENANCE
VALVE TRAY REPLACEMENT
1)Shut off the gas supply to the unit.
2)Remove the right side mesh by gathering the mesh together and lifting the curved end of the rod up and out of the bracket located on the top right of the glass frame.
Now slide the straight end of the rod out from the bracket located on the middle inside top of the outer shell. Repeat for left side.
4)Remove the glass door.
a. Release the 2 door latches on the left and right side at the top of the firebox.
Latch Location
Latch
6)Remove the burner orifice cover plate from the log tray by undoing the 2 screws.
Burner Orifice Cover Plate
MAINTENANCE
Right Side Rod with Screen Removed
b.Swing the door out from the top and release the hinge on the left side of the door and lift out.
7)Remove the brick panels.
8)Remove the grate by undoing the 3 screws.
Grate
9)Remove the burner tube by removing the 2 screws.
3)Remove the front cover plate by lifting up off of the pins on the left and right side of the firebox.
HingeDoor
c.Place the door on a soft surface to prevent scratching.
5)Remove the log set.
Burner Tube
10)Remove the rear log stand by removing the 4 screws.
Rear Log Stand
Front Cover Plate | Right Side Pin Shown |
42 | Regency® |