MAINTENANCE
11) Disconnect the inlet gas line from the | 14) Disconnect the spark electrode wire from | 16) Completely pull out the valve tray. |
valve. | the DC spark box. |
|
12)Unplug the green (TH) and white (TP/TH) wires from the valve.
Disconnect 2 wires
13)Disconnect the 2 DC Spark generator wires from the DC spark box located in front of the valve.
DC Spark Box Electrode Wire
15)Remove the 16 screws that hold the valve tray to the firebox and slightly pull out the valve tray.
Valve Tray Out
17)Replace the valve tray and reverse steps to
18)Turn on the gas supply and check for gas leaks.
19)
20)
21)
22)
23)
24)Check the inlet and outlet pressures.
25)Check operation of flame control.
26)Check for proper flame appearance.
MAINTENANCE
Location of Screws.
Disconnect 2 generator wires
Regency® L676S Direct Vent Gas Fireplace | 41 |