Nilfisk-Advance America SR 1100S manuel dutilisation Use, Battery CHECK/SETTING on a NEW Machine

Page 63

USER MANUAL

ENGLISH

USE

WARNING!

On some points of the machine there are some adhesive plates indicating:

–DANGER

–WARNING

–CAUTION

–CONSULTATION

While reading this Manual, the operator must pay careful attention to the symbols shown on the plates. Do not cover these plates for any reason and immediately replace them if they are damaged.

BATTERY CHECK/SETTING ON A NEW MACHINE

The machine needs two 12 V lead batteries, connected according to the diagram (44).

The machine can be supplied in one of the following confi gurations:

a)Batteries already installed and ready to be used

b)Batteries installed on the machine but without electrolyte

c)Without batteries

According to machine confi guration, proceed as follows.

a)Batteries already installed and ready to be used

1.Open the machine hood (7) and check that the batteries are connected to the dynamotor through the appropriate terminals.

2.Close the hood (7).

3.The machine is ready to be used.

If the batteries are discharged, charge them with an external battery charger.

b)Batteries installed on the machine but without electrolyte

1.Open the machine hood (7).

2.Remove all battery caps (45).

WARNING!

Pay attention when using sulphuric acid, as it is corrosive. If it comes in contact with skin or eyes, rinse thoroughly with water and consult a physician.

Batteries have to be filled in a well-ventilated area. Wear protective gloves.

3.Fill the battery cells with sulphuric acid for batteries (density from 1.27 to 1.29 kg at 25°C) in accordance with the instructions shown in the Battery Manual.

The correct quantity of sulphuric acid is shown in the Battery Manual.

4.Let the batteries rest and fi ll in with sulphuric acid in accordance with the instructions shown in the Battery Manual.

5.Charge the batteries with an external battery charger.

c)Without batteries

1.Buy appropriate batteries (see the Technical Data paragraph and the diagram (44)). For the battery choice and installation, apply to qualifi ed battery Retailers.

2.Install the batteries.

3.Charge the batteries with an external battery charger.

SR 1100S P

146 2559 000(2)2007-02 A

13

Page 62 Page 64
Image 63
Page 62 Page 64
Contents 146 2559 00022007-02 a Sweeper SR 1100S PSR 1100S P SweeperSR 1100S P InhaltsverzeichnisEinleitung Funktionseigenschaften Andere ReferenzanleitungenErsatzteile UND Wartung Änderungen UND Technische VerbesserungenBenutzte Symbole AUSPACKEN/AUSLIEFERUNGSicherheit Allgemeine Hinweise Deutsch Betriebsanleitung Maschinenaufbau Maschinenbeschreibung63 64 ZUBEHÖRE/OPTIONEN Schalttafel UND BedienelementeTechnische Daten Farbencodes SchaltplanSchaltplan fortgesetzt PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen Maschine BetriebVOR DEM Anlassen DER Maschine Maschinenanlassen UND -ABSTELLENMaschinenanlassen Maschinenabstellen Maschine in BetriebWartung Stunden Übersichtstabelle DER Planmässigen WartungVorgang AllePrüfung UND Einstellung DER Hauptkehrwalzenhöhe Die entsprechende Nabe a eingefügt wird Ersetzen DER HauptkehrwalzeErsetzung DER Seitenbesen Prüfung UND Einstellung DER SeitenbesenhöheReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung DER Flapshöhe UND Funktionsfähigkeit Prüfung der SeitenflapsPrüfung der Vorder- und Hinterflaps Einbau PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER SicherungenPrüfung/Ersetzung der Flachsicherungen Prüfung der rückschaltbaren SicherungenFehlersuche VerschrottungFehler Mögliche Ursache Lösung Introduction Table DES MatieresIntroduction Capacites Operationnelles Autres Manuels DE ReferencePieces DE Rechange ET Entretien Modifications ET AmeliorationsSymboles Utilises Deballage / LivraisonSecurite Instructions Generales Français Manuel Dutilisation Structure DE LA Machine Description DE LA MachineStructure DE LA Machine suite Accessoires / Options Tableau DE Bord ET CommandesCaracteristiques Techniques Schema Electrique LégendeCodes des couleurs Schema Electrique suite Controle / Preparation DES Batteries SUR UNE Machine Neuve UtilisationAvant LA Mise EN Marche Mise EN Marche ET Arret DE LA MachineMise en marche de la machine Arrêt de la machine Machine AU TravailEntretien Heures Plan Dentretien ProgrammeLors de la Toutes Procédure LesControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Controle ET Reglage DE LA Hauteur DES Balais Lateraux Remplacement DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Controle DE LA Hauteur ET DU Fonctionnement DES Volets Contrôle des volets latérauxContrôle des volets avant et arrière Repose Controle / Remplacement Retablissement DES FusiblesContrôle / remplacement des fusibles à lamelle Contrôle des fusibles restaurablesDepistage DES Pannes Mise EN DechargeProblème Cause probable Remède Table of Contents Identification Data Manual Purpose and ContentsHOW to Keep this Manual Declaration of Conformity TargetOperation Capabilities Spare Parts and MaintenanceOther Reference Manuals Changes and ImprovementsSafety SymbolsUNPACKING/DELIVERY General Instructions English Machine Structure Machine DescriptionMachine Structure Continues Control Panel ACCESSORIES/OPTIONSTechnical Data Wiring Diagram KeyColour code Wiring Diagram Continues USE Battery CHECK/SETTING on a NEW MachineBefore Starting the Machine Starting and Stopping the MachineStarting the machine Stopping the machine Machine OperationMaintenance Scheduled Maintenance Table Every Procedure Upon delivery 100 200 300 400Hours Main Broom Height Check Adjustment Main Broom Replacement Side Broom Replacement Side Broom Height Check AdjustmentDust Filter Cleaning and Integrity Check Skirt Height and Operation Check Side skirt checkFront and rear skirt check Assembly Hood Safety Switch Operation CheckFuse CHECK/REPLACEMENT/RESET Lamellar fuse check/replacementTroubleshooting ScrappingTrouble Possible cause Remedy Inleiding InhoudsopgaveInleiding Bedrijfscapaciteit Andere GebruikershandleidingenVervangingsonderdelen EN Onderhoud Modificaties EN VerbeteringenGebruikte Symbolen Verpakking VERWIJDEREN/AFLEVERINGVeiligheid Algemene Instructies Nederlands Gebruiksaanwijzing Bouw VAN DE Machine Beschrijving VAN DE MachineOpbouw VAN DE Machine vervolg Bedieningspaneel EN Knoppen Accessoires / OptiesTechnische Eigenschappen Kleurcodering Elektrisch SchemaElektrische Installatie vervolg Controle / Voorbereidingen Voor Accus OP EEN Nieuwe Machine GebruikVoor HET Starten VAN DE Machine DE Machine Starten EN StoppenStarten van de machine De machine stoppen Machine in BedrijfOnderhoud Procedure Bij aflevering Elke OnderhoudsschemaDE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Zijborstels Vervangen DE Hoogte VAN DE Zijborstels Controleren EN AfstellenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle VAN DE Hoogte EN Werking VAN DE Flaps Controle van de zijflapsControle van de voor- en achterflap Montage Controle / Vervanging / Resetten VAN DE ZekeringenControle/vervanging van de smeltzekeringen Controle van de herbruikbare zekeringenStoringen Lokaliseren VerwijderingProbleem Waarschijnlijke oorzaak Oplossing

SR 1100S specifications

The Nilfisk-Advance America SR 1100S is a robust, versatile scrubber designed to meet the diverse cleaning needs of various commercial environments. Ideal for both small and medium-sized spaces, this machine excels in performance, efficiency, and ease of use, making it an excellent choice for businesses looking to achieve a high standard of cleanliness.

One of the standout features of the SR 1100S is its compact and ergonomic design. This allows for easy maneuverability in tight spaces such as aisles, smaller retail environments, and crowded areas. The machine is equipped with a highly efficient brush system that ensures effective scrubbing while reducing water and detergent consumption, enabling operators to achieve optimal results while also being environmentally conscious.

The SR 1100S is powered by a reliable battery system that offers an impressive run time. This allows for extended cleaning sessions without the need for frequent recharging, which can be a significant advantage in busy commercial settings. Additionally, the scrubber features a simple control panel, making it user-friendly for operators of varying skill levels. The intuitive design means that staff can quickly learn to operate the machine, enhancing productivity throughout the organization.

One of the key technologies employed in the Nilfisk-Advance America SR 1100S is the advanced Ecoflex system. This innovative technology enables users to adjust the water and detergent flow according to the specific cleaning needs of each task. This not only helps in conserving resources but also ensures that surfaces are cleaned effectively, regardless of the level of soiling.

Furthermore, the SR 1100S is designed with operator safety in mind. With features that reduce noise levels during operation, it makes it suitable for use in noise-sensitive areas, such as schools and hospitals. The scrubber is also built with maintenance accessibility in mind, allowing for quick and easy servicing, which minimizes downtime.

In conclusion, the Nilfisk-Advance America SR 1100S is a powerful, efficient, and user-friendly scrubber that is backed by advanced technology. Its compact design, effective cleaning capabilities, and operator-friendly features make it a valuable addition to any cleaning fleet. With its commitment to sustainability and efficiency, the SR 1100S is an ideal choice for businesses aiming to maintain a clean and safe environment for employees and customers alike.
Top Page Image Contents