Nilfisk-Advance America SR 1100S Troubleshooting, Scrapping, Trouble Possible cause Remedy

Page 74

ENGLISH

USER MANUAL

TROUBLESHOOTING

Trouble

Possible cause

Remedy

 

 

 

 

The battery connector (46) is disconnected.

Connect the battery connector.

 

 

 

 

The engine oil level is low.

Add engine oil. (1)

 

 

 

When the ignition key is turned to "I", the engine

The fuel level is low.

Refuel. (1)

 

 

does not start.

The fuel does not reach the carburettor.

Check the connecting hose. (1)

 

 

 

 

 

The hood is not properly closed.

Close the hood properly.

 

 

 

 

The spark plug does not produce a spark.

Clean/replace the spark plug. (1)

 

 

 

The engine stops during operation.

The engine oil level is low.

Add engine oil. (1)

 

 

The fuel level is low.

Refuel. (1)

 

 

 

 

 

The parking brake is engaged.

Disengage the parking brake.

The machine does not move when pressing the

 

 

When starting the machine with the ignition

Start the machine with the ignition key (82),

pedal (2).

key (82), the pedal (2) is pressed, or the

only after being on the driver's seat and

 

 

operator is not yet on the driver's seat.

without pressing the pedal (2).

 

 

 

The main broom does not work.

The circuit breaker (47) is deactivated.

Reset the fuse (47) by pressing the relevant

switch.

 

 

 

 

 

 

The main broom is not lowered.

Lower the main broom.

The side brooms do not operate.

 

 

The circuit breaker (48) is deactivated.

Reset the fuse (48) by pressing the relevant

 

 

switch.

 

 

 

 

 

 

 

To detect the failure, refer to the Service

The dive system malfunction led (49) is fl ashing.

The drive system is malfunctioning.

Manual (at any Nilfi sk-Advance Service

 

 

Center).

 

 

 

(1) For the relevant procedure, see the Petrol Engine Manual.

For further information, refer to the Service Manual, available at any Nilfi sk-Advance Service Center.

SCRAPPING

Have the machine scrapped by a qualifi ed scrapper.

Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the Law in force:

–Batteries

–Engine oil

–Polyester dust fi lter

–Main and side brooms

–Plastic hoses and components

–Electrical and electronic components (*)

(*)Refer to the nearest Nilfi sk-Advance Center especially when scrapping electrical and electronic components.

24

146 2559 000(2)2007-02 A

SR 1100S P

Page 73 Page 75
Image 74
Page 73 Page 75
Contents Sweeper SR 1100S P 146 2559 00022007-02 aSweeper SR 1100S PInhaltsverzeichnis SR 1100S PEinleitung Änderungen UND Technische Verbesserungen Andere ReferenzanleitungenErsatzteile UND Wartung FunktionseigenschaftenSicherheit Benutzte SymboleAUSPACKEN/AUSLIEFERUNG Allgemeine Hinweise Deutsch Betriebsanleitung Maschinenbeschreibung Maschinenaufbau63 64 Schalttafel UND Bedienelemente ZUBEHÖRE/OPTIONENTechnische Daten Schaltplan FarbencodesSchaltplan fortgesetzt Betrieb PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen MaschineMaschinenanlassen VOR DEM Anlassen DER MaschineMaschinenanlassen UND -ABSTELLEN Maschine in Betrieb MaschinenabstellenWartung Alle Übersichtstabelle DER Planmässigen WartungVorgang StundenPrüfung UND Einstellung DER Hauptkehrwalzenhöhe Ersetzen DER Hauptkehrwalze Die entsprechende Nabe a eingefügt wirdPrüfung UND Einstellung DER Seitenbesenhöhe Ersetzung DER SeitenbesenReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung der Vorder- und Hinterflaps Prüfung DER Flapshöhe UND FunktionsfähigkeitPrüfung der Seitenflaps Prüfung der rückschaltbaren Sicherungen PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER SicherungenPrüfung/Ersetzung der Flachsicherungen EinbauFehler Mögliche Ursache Lösung FehlersucheVerschrottung Table DES Matieres IntroductionIntroduction Modifications ET Ameliorations Autres Manuels DE ReferencePieces DE Rechange ET Entretien Capacites OperationnellesSecurite Symboles UtilisesDeballage / Livraison Instructions Generales Français Manuel Dutilisation Description DE LA Machine Structure DE LA MachineStructure DE LA Machine suite Tableau DE Bord ET Commandes Accessoires / OptionsCaracteristiques Techniques Codes des couleurs Schema ElectriqueLégende Schema Electrique suite Utilisation Controle / Preparation DES Batteries SUR UNE Machine NeuveMise en marche de la machine Avant LA Mise EN MarcheMise EN Marche ET Arret DE LA Machine Machine AU Travail Arrêt de la machineEntretien Les Plan Dentretien ProgrammeLors de la Toutes Procédure HeuresControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Remplacement DES Balais Lateraux Controle ET Reglage DE LA Hauteur DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Contrôle des volets avant et arrière Controle DE LA Hauteur ET DU Fonctionnement DES VoletsContrôle des volets latéraux Contrôle des fusibles restaurables Controle / Remplacement Retablissement DES FusiblesContrôle / remplacement des fusibles à lamelle ReposeProblème Cause probable Remède Depistage DES PannesMise EN Decharge Table of Contents Target Manual Purpose and ContentsHOW to Keep this Manual Declaration of Conformity Identification DataChanges and Improvements Spare Parts and MaintenanceOther Reference Manuals Operation CapabilitiesUNPACKING/DELIVERY SafetySymbols General Instructions English Machine Description Machine StructureMachine Structure Continues ACCESSORIES/OPTIONS Control PanelTechnical Data Colour code Wiring DiagramKey Wiring Diagram Continues Battery CHECK/SETTING on a NEW Machine USEStarting the machine Before Starting the MachineStarting and Stopping the Machine Machine Operation Stopping the machineMaintenance Hours Scheduled Maintenance TableEvery Procedure Upon delivery 100 200 300 400 Main Broom Height Check Adjustment Main Broom Replacement Side Broom Height Check Adjustment Side Broom ReplacementDust Filter Cleaning and Integrity Check Front and rear skirt check Skirt Height and Operation CheckSide skirt check Lamellar fuse check/replacement Hood Safety Switch Operation CheckFuse CHECK/REPLACEMENT/RESET AssemblyTrouble Possible cause Remedy TroubleshootingScrapping Inhoudsopgave InleidingInleiding Modificaties EN Verbeteringen Andere GebruikershandleidingenVervangingsonderdelen EN Onderhoud BedrijfscapaciteitVeiligheid Gebruikte SymbolenVerpakking VERWIJDEREN/AFLEVERING Algemene Instructies Nederlands Gebruiksaanwijzing Beschrijving VAN DE Machine Bouw VAN DE MachineOpbouw VAN DE Machine vervolg Accessoires / Opties Bedieningspaneel EN KnoppenTechnische Eigenschappen Elektrisch Schema KleurcoderingElektrische Installatie vervolg Gebruik Controle / Voorbereidingen Voor Accus OP EEN Nieuwe MachineStarten van de machine Voor HET Starten VAN DE MachineDE Machine Starten EN Stoppen Machine in Bedrijf De machine stoppenOnderhoud Onderhoudsschema Procedure Bij aflevering ElkeDE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Hoogte VAN DE Zijborstels Controleren EN Afstellen DE Zijborstels VervangenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle van de voor- en achterflap Controle VAN DE Hoogte EN Werking VAN DE FlapsControle van de zijflaps Controle van de herbruikbare zekeringen Controle / Vervanging / Resetten VAN DE ZekeringenControle/vervanging van de smeltzekeringen MontageProbleem Waarschijnlijke oorzaak Oplossing Storingen LokaliserenVerwijdering

SR 1100S specifications

The Nilfisk-Advance America SR 1100S is a robust, versatile scrubber designed to meet the diverse cleaning needs of various commercial environments. Ideal for both small and medium-sized spaces, this machine excels in performance, efficiency, and ease of use, making it an excellent choice for businesses looking to achieve a high standard of cleanliness.

One of the standout features of the SR 1100S is its compact and ergonomic design. This allows for easy maneuverability in tight spaces such as aisles, smaller retail environments, and crowded areas. The machine is equipped with a highly efficient brush system that ensures effective scrubbing while reducing water and detergent consumption, enabling operators to achieve optimal results while also being environmentally conscious.

The SR 1100S is powered by a reliable battery system that offers an impressive run time. This allows for extended cleaning sessions without the need for frequent recharging, which can be a significant advantage in busy commercial settings. Additionally, the scrubber features a simple control panel, making it user-friendly for operators of varying skill levels. The intuitive design means that staff can quickly learn to operate the machine, enhancing productivity throughout the organization.

One of the key technologies employed in the Nilfisk-Advance America SR 1100S is the advanced Ecoflex system. This innovative technology enables users to adjust the water and detergent flow according to the specific cleaning needs of each task. This not only helps in conserving resources but also ensures that surfaces are cleaned effectively, regardless of the level of soiling.

Furthermore, the SR 1100S is designed with operator safety in mind. With features that reduce noise levels during operation, it makes it suitable for use in noise-sensitive areas, such as schools and hospitals. The scrubber is also built with maintenance accessibility in mind, allowing for quick and easy servicing, which minimizes downtime.

In conclusion, the Nilfisk-Advance America SR 1100S is a powerful, efficient, and user-friendly scrubber that is backed by advanced technology. Its compact design, effective cleaning capabilities, and operator-friendly features make it a valuable addition to any cleaning fleet. With its commitment to sustainability and efficiency, the SR 1100S is an ideal choice for businesses aiming to maintain a clean and safe environment for employees and customers alike.
Top Page Image Contents