Nilfisk-Advance America SR 1100S Skirt Height and Operation Check, Side skirt check

Page 72

ENGLISH

USER MANUAL

SKIRT HEIGHT AND OPERATION CHECK

1.Drive the machine on a level fl oor that is suitable for checking the skirt height.

Engage the parking brake with the pedal (3) and the lever

(4).

2.Turn the ignition key (82) to "0".

Side skirt check

3.

Unscrew the knobs (23 and 21) and remove both left (20)

 

 

 

and right doors (22).

 

 

4.

Check the side skirts (13 and 14) for integrity. Replace the

S311400

S311401

 

skirts when they have cuts (A, Fig. 12) larger than 20 mm

Figure 12

Figure 13

 

or cracks (B) larger than 10 mm (for skirt replacement,

 

 

 

refer to the Service Manual).

 

 

5.Check that distance from the ground of the side skirts (13 and 14) is within 0 – 3 mm (A, Fig. 13). If necessary, adjust the skirt height by using the slots on the screws (A, Fig.

16).

6.Assemble the components in the reverse order of disassembly.

Front and rear skirt check

7.

Remove the main broom, as shown in the relevant

 

 

 

paragraph.

 

 

8.

Check the front (15) and rear skirts (16) for integrity.

S311402

S311403

 

Replace the skirts when they have cuts (A, Fig. 12) larger

Figure 14

Figure 15

 

than 20 mm or cracks (B) larger than 10 mm (for skirt

 

 

 

replacement, refer to the Service Manual).

 

 

9.Check that:

The front skirt (A, Fig. 17) slightly touches the ground and that it is not detached from the ground (A, Fig. 14).

The distance from the ground of the rear skirt (B, Fig.

17)is within 0 – 3 mm (A, Fig. 13).

10.If necessary, adjust the skirt height by using the slots on the screws (C and D, Fig. 17).

11.Press the front skirt lifting pedal (5) and check that the front skirt (A, Fig. 15) turns upward for about 90° (as shown in the fi gure); then release the pedal and check that the skirt does not remain in an intermediate position but returns to its initial position. If necessary, for the front

skirt control cable adjustment or replacement, refer to the

A

Service Manual.

12. Assemble the components in the reverse order of

A

disassembly.

S311404

 

 

Figure 16

S311405

Figure 17

22

146 2559 000(2)2007-02 A

SR 1100S P

Image 72
Contents Sweeper SR 1100S P 146 2559 00022007-02 aSweeper SR 1100S PInhaltsverzeichnis SR 1100S PEinleitung Andere Referenzanleitungen Ersatzteile UND WartungÄnderungen UND Technische Verbesserungen FunktionseigenschaftenBenutzte Symbole AUSPACKEN/AUSLIEFERUNGSicherheit Allgemeine Hinweise Deutsch Betriebsanleitung Maschinenbeschreibung Maschinenaufbau63 64 Schalttafel UND Bedienelemente ZUBEHÖRE/OPTIONENTechnische Daten Schaltplan FarbencodesSchaltplan fortgesetzt Betrieb PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen MaschineVOR DEM Anlassen DER Maschine Maschinenanlassen UND -ABSTELLENMaschinenanlassen Maschine in Betrieb MaschinenabstellenWartung Übersichtstabelle DER Planmässigen Wartung VorgangAlle StundenPrüfung UND Einstellung DER Hauptkehrwalzenhöhe Ersetzen DER Hauptkehrwalze Die entsprechende Nabe a eingefügt wirdPrüfung UND Einstellung DER Seitenbesenhöhe Ersetzung DER SeitenbesenReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung DER Flapshöhe UND Funktionsfähigkeit Prüfung der SeitenflapsPrüfung der Vorder- und Hinterflaps PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER Sicherungen Prüfung/Ersetzung der FlachsicherungenPrüfung der rückschaltbaren Sicherungen EinbauFehlersuche VerschrottungFehler Mögliche Ursache Lösung Table DES Matieres IntroductionIntroduction Autres Manuels DE Reference Pieces DE Rechange ET EntretienModifications ET Ameliorations Capacites OperationnellesSymboles Utilises Deballage / LivraisonSecurite Instructions Generales Français Manuel Dutilisation Description DE LA Machine Structure DE LA MachineStructure DE LA Machine suite Tableau DE Bord ET Commandes Accessoires / OptionsCaracteristiques Techniques Schema Electrique LégendeCodes des couleurs Schema Electrique suite Utilisation Controle / Preparation DES Batteries SUR UNE Machine NeuveAvant LA Mise EN Marche Mise EN Marche ET Arret DE LA MachineMise en marche de la machine Machine AU Travail Arrêt de la machineEntretien Plan Dentretien Programme Lors de la Toutes ProcédureLes HeuresControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Remplacement DES Balais Lateraux Controle ET Reglage DE LA Hauteur DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Controle DE LA Hauteur ET DU Fonctionnement DES Volets Contrôle des volets latérauxContrôle des volets avant et arrière Controle / Remplacement Retablissement DES Fusibles Contrôle / remplacement des fusibles à lamelleContrôle des fusibles restaurables ReposeDepistage DES Pannes Mise EN DechargeProblème Cause probable Remède Table of Contents Manual Purpose and Contents HOW to Keep this Manual Declaration of ConformityTarget Identification DataSpare Parts and Maintenance Other Reference ManualsChanges and Improvements Operation CapabilitiesSafety SymbolsUNPACKING/DELIVERY General Instructions English Machine Description Machine StructureMachine Structure Continues ACCESSORIES/OPTIONS Control PanelTechnical Data Wiring Diagram KeyColour code Wiring Diagram Continues Battery CHECK/SETTING on a NEW Machine USEBefore Starting the Machine Starting and Stopping the MachineStarting the machine Machine Operation Stopping the machineMaintenance Scheduled Maintenance Table Every Procedure Upon delivery 100 200 300 400Hours Main Broom Height Check Adjustment Main Broom Replacement Side Broom Height Check Adjustment Side Broom ReplacementDust Filter Cleaning and Integrity Check Skirt Height and Operation Check Side skirt checkFront and rear skirt check Hood Safety Switch Operation Check Fuse CHECK/REPLACEMENT/RESETLamellar fuse check/replacement AssemblyTroubleshooting ScrappingTrouble Possible cause Remedy Inhoudsopgave InleidingInleiding Andere Gebruikershandleidingen Vervangingsonderdelen EN OnderhoudModificaties EN Verbeteringen BedrijfscapaciteitGebruikte Symbolen Verpakking VERWIJDEREN/AFLEVERINGVeiligheid Algemene Instructies Nederlands Gebruiksaanwijzing Beschrijving VAN DE Machine Bouw VAN DE MachineOpbouw VAN DE Machine vervolg Accessoires / Opties Bedieningspaneel EN KnoppenTechnische Eigenschappen Elektrisch Schema KleurcoderingElektrische Installatie vervolg Gebruik Controle / Voorbereidingen Voor Accus OP EEN Nieuwe MachineVoor HET Starten VAN DE Machine DE Machine Starten EN StoppenStarten van de machine Machine in Bedrijf De machine stoppenOnderhoud Onderhoudsschema Procedure Bij aflevering ElkeDE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Hoogte VAN DE Zijborstels Controleren EN Afstellen DE Zijborstels VervangenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle VAN DE Hoogte EN Werking VAN DE Flaps Controle van de zijflapsControle van de voor- en achterflap Controle / Vervanging / Resetten VAN DE Zekeringen Controle/vervanging van de smeltzekeringenControle van de herbruikbare zekeringen MontageStoringen Lokaliseren VerwijderingProbleem Waarschijnlijke oorzaak Oplossing

SR 1100S specifications

The Nilfisk-Advance America SR 1100S is a robust, versatile scrubber designed to meet the diverse cleaning needs of various commercial environments. Ideal for both small and medium-sized spaces, this machine excels in performance, efficiency, and ease of use, making it an excellent choice for businesses looking to achieve a high standard of cleanliness.

One of the standout features of the SR 1100S is its compact and ergonomic design. This allows for easy maneuverability in tight spaces such as aisles, smaller retail environments, and crowded areas. The machine is equipped with a highly efficient brush system that ensures effective scrubbing while reducing water and detergent consumption, enabling operators to achieve optimal results while also being environmentally conscious.

The SR 1100S is powered by a reliable battery system that offers an impressive run time. This allows for extended cleaning sessions without the need for frequent recharging, which can be a significant advantage in busy commercial settings. Additionally, the scrubber features a simple control panel, making it user-friendly for operators of varying skill levels. The intuitive design means that staff can quickly learn to operate the machine, enhancing productivity throughout the organization.

One of the key technologies employed in the Nilfisk-Advance America SR 1100S is the advanced Ecoflex system. This innovative technology enables users to adjust the water and detergent flow according to the specific cleaning needs of each task. This not only helps in conserving resources but also ensures that surfaces are cleaned effectively, regardless of the level of soiling.

Furthermore, the SR 1100S is designed with operator safety in mind. With features that reduce noise levels during operation, it makes it suitable for use in noise-sensitive areas, such as schools and hospitals. The scrubber is also built with maintenance accessibility in mind, allowing for quick and easy servicing, which minimizes downtime.

In conclusion, the Nilfisk-Advance America SR 1100S is a powerful, efficient, and user-friendly scrubber that is backed by advanced technology. Its compact design, effective cleaning capabilities, and operator-friendly features make it a valuable addition to any cleaning fleet. With its commitment to sustainability and efficiency, the SR 1100S is an ideal choice for businesses aiming to maintain a clean and safe environment for employees and customers alike.