Nilfisk-Advance America SR 1100S manuel dutilisation Maintenance

Page 66

ENGLISH

USER MANUAL

HOPPER EMPTYING

1.Stop the machine by releasing the drive pedal.

2.Turn the ignition key (2) to "0".

3.Engage the parking brake by pressing the pedal (3) and engaging the lever (4).

4.Disengage the hook (18) by pulling its lower end.

5.Remove the hopper (17) by using the handle (19) and by disengaging it from the inner guides.

Discharge all the debris into special containers. To make discharging procedure easier, inside the hopper there are two different containers (optional) with handle (36).

6.Install the containers with handle (36), if equipped.

7.Install the hopper (17) and engage it to the inner guides, then fasten it with the hook (18).

8.The machine is ready to start working again.

AFTER MACHINE USE

After working, before leaving the machine, perform the following procedures.

1.Lift the side brooms with the lever (91).

2.Lift the main broom with the lever (92).

3.Turn on the fi lter shaker with the switch (85).

4.Empty the hopper (17) (see the procedure in the previous paragraph).

5.Remove the ignition key (82).

6.Engage the parking brake by pressing the pedal (3) and engaging the lever (4).

PUSHING/TOWING THE MACHINE

To push/tow the machine when it is turned off, no special prearrangement is necessary.

MACHINE LONG INACTIVITY

If the machine is not going to be used for more than 30 days, proceed as follows:

1.Check that the machine storage area is dry and clean.

2.Disconnect the negative terminal of the batteries (43).

3.Handle the petrol engine as shown in the relevant Manual.

FIRST PERIOD OF USE

After the fi rst 8 hours perform the following procedures:

–Check the fastening and connecting parts for proper tightening.

–Check the visible parts for integrity and leakages.

After the fi rst 20 working hours, or after the fi rst month, change the engine oil (see the procedure in the Petrol Engine Manual).

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.

The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions, which are to be defi ned by the person in charge of the maintenance.

All scheduled or extraordinary maintenance procedures must be performed by qualifi ed personnel, or by an authorised Service Center.

This Manual describes only the easiest and most common maintenance procedures.

For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted at any Service Center.

WARNING!

To perform maintenance procedures, the machine must be off and, if necessary, the batteries must be disconnected.

Moreover, carefully read all the instructions in the Safety chapter before performing any maintenance procedure.

16

146 2559 000(2)2007-02 A

SR 1100S P

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Sweeper SR 1100S P 146 2559 00022007-02 aSweeper SR 1100S PInhaltsverzeichnis SR 1100S PEinleitung Änderungen UND Technische Verbesserungen Andere ReferenzanleitungenErsatzteile UND Wartung FunktionseigenschaftenBenutzte Symbole AUSPACKEN/AUSLIEFERUNGSicherheit Allgemeine Hinweise Deutsch Betriebsanleitung Maschinenbeschreibung Maschinenaufbau63 64 Schalttafel UND Bedienelemente ZUBEHÖRE/OPTIONENTechnische Daten Schaltplan FarbencodesSchaltplan fortgesetzt Betrieb PRÜFUNG/VORBEREITUNG DER Batterien AN Einer Neuen MaschineVOR DEM Anlassen DER Maschine Maschinenanlassen UND -ABSTELLENMaschinenanlassen Maschine in Betrieb MaschinenabstellenWartung Alle Übersichtstabelle DER Planmässigen WartungVorgang StundenPrüfung UND Einstellung DER Hauptkehrwalzenhöhe Ersetzen DER Hauptkehrwalze Die entsprechende Nabe a eingefügt wirdPrüfung UND Einstellung DER Seitenbesenhöhe Ersetzung DER SeitenbesenReinigung UND Vollständigkeitsprüfung Desb C E Staubfilters Prüfung DER Flapshöhe UND Funktionsfähigkeit Prüfung der SeitenflapsPrüfung der Vorder- und Hinterflaps Prüfung der rückschaltbaren Sicherungen PRÜFUNG/ERSETZUNG/RÜCKSCHALTUNG DER SicherungenPrüfung/Ersetzung der Flachsicherungen EinbauFehlersuche VerschrottungFehler Mögliche Ursache Lösung Table DES Matieres IntroductionIntroduction Modifications ET Ameliorations Autres Manuels DE ReferencePieces DE Rechange ET Entretien Capacites OperationnellesSymboles Utilises Deballage / LivraisonSecurite Instructions Generales Français Manuel Dutilisation Description DE LA Machine Structure DE LA MachineStructure DE LA Machine suite Tableau DE Bord ET Commandes Accessoires / OptionsCaracteristiques Techniques Schema Electrique LégendeCodes des couleurs Schema Electrique suite Utilisation Controle / Preparation DES Batteries SUR UNE Machine NeuveAvant LA Mise EN Marche Mise EN Marche ET Arret DE LA MachineMise en marche de la machine Machine AU Travail Arrêt de la machineEntretien Les Plan Dentretien ProgrammeLors de la Toutes Procédure HeuresControle ET Reglage DE LA Hauteur DU Balai Central Remplacement DU Balai Central Remplacement DES Balais Lateraux Controle ET Reglage DE LA Hauteur DES Balais LaterauxNettoyage ET Controle DE Lintegrite DU Filtre a Poussiere Controle DE LA Hauteur ET DU Fonctionnement DES Volets Contrôle des volets latérauxContrôle des volets avant et arrière Contrôle des fusibles restaurables Controle / Remplacement Retablissement DES FusiblesContrôle / remplacement des fusibles à lamelle ReposeDepistage DES Pannes Mise EN DechargeProblème Cause probable Remède Table of Contents Target Manual Purpose and ContentsHOW to Keep this Manual Declaration of Conformity Identification DataChanges and Improvements Spare Parts and MaintenanceOther Reference Manuals Operation CapabilitiesSafety SymbolsUNPACKING/DELIVERY General Instructions English Machine Description Machine StructureMachine Structure Continues ACCESSORIES/OPTIONS Control PanelTechnical Data Wiring Diagram KeyColour code Wiring Diagram Continues Battery CHECK/SETTING on a NEW Machine USEBefore Starting the Machine Starting and Stopping the MachineStarting the machine Machine Operation Stopping the machineMaintenance Scheduled Maintenance Table Every Procedure Upon delivery 100 200 300 400Hours Main Broom Height Check Adjustment Main Broom Replacement Side Broom Height Check Adjustment Side Broom ReplacementDust Filter Cleaning and Integrity Check Skirt Height and Operation Check Side skirt checkFront and rear skirt check Lamellar fuse check/replacement Hood Safety Switch Operation CheckFuse CHECK/REPLACEMENT/RESET AssemblyTroubleshooting ScrappingTrouble Possible cause Remedy Inhoudsopgave InleidingInleiding Modificaties EN Verbeteringen Andere GebruikershandleidingenVervangingsonderdelen EN Onderhoud BedrijfscapaciteitGebruikte Symbolen Verpakking VERWIJDEREN/AFLEVERINGVeiligheid Algemene Instructies Nederlands Gebruiksaanwijzing Beschrijving VAN DE Machine Bouw VAN DE MachineOpbouw VAN DE Machine vervolg Accessoires / Opties Bedieningspaneel EN KnoppenTechnische Eigenschappen Elektrisch Schema KleurcoderingElektrische Installatie vervolg Gebruik Controle / Voorbereidingen Voor Accus OP EEN Nieuwe MachineVoor HET Starten VAN DE Machine DE Machine Starten EN StoppenStarten van de machine Machine in Bedrijf De machine stoppenOnderhoud Onderhoudsschema Procedure Bij aflevering ElkeDE Hoogte VAN DE Hoofdborstel Controleren EN Afstellen DE Hoofdborstelvervangen DE Hoogte VAN DE Zijborstels Controleren EN Afstellen DE Zijborstels VervangenReiniging EN Contole OP Integriteit VAN HET Stoffilter Controle VAN DE Hoogte EN Werking VAN DE Flaps Controle van de zijflapsControle van de voor- en achterflap Controle van de herbruikbare zekeringen Controle / Vervanging / Resetten VAN DE ZekeringenControle/vervanging van de smeltzekeringen MontageStoringen Lokaliseren VerwijderingProbleem Waarschijnlijke oorzaak Oplossing

SR 1100S specifications

The Nilfisk-Advance America SR 1100S is a robust, versatile scrubber designed to meet the diverse cleaning needs of various commercial environments. Ideal for both small and medium-sized spaces, this machine excels in performance, efficiency, and ease of use, making it an excellent choice for businesses looking to achieve a high standard of cleanliness.

One of the standout features of the SR 1100S is its compact and ergonomic design. This allows for easy maneuverability in tight spaces such as aisles, smaller retail environments, and crowded areas. The machine is equipped with a highly efficient brush system that ensures effective scrubbing while reducing water and detergent consumption, enabling operators to achieve optimal results while also being environmentally conscious.

The SR 1100S is powered by a reliable battery system that offers an impressive run time. This allows for extended cleaning sessions without the need for frequent recharging, which can be a significant advantage in busy commercial settings. Additionally, the scrubber features a simple control panel, making it user-friendly for operators of varying skill levels. The intuitive design means that staff can quickly learn to operate the machine, enhancing productivity throughout the organization.

One of the key technologies employed in the Nilfisk-Advance America SR 1100S is the advanced Ecoflex system. This innovative technology enables users to adjust the water and detergent flow according to the specific cleaning needs of each task. This not only helps in conserving resources but also ensures that surfaces are cleaned effectively, regardless of the level of soiling.

Furthermore, the SR 1100S is designed with operator safety in mind. With features that reduce noise levels during operation, it makes it suitable for use in noise-sensitive areas, such as schools and hospitals. The scrubber is also built with maintenance accessibility in mind, allowing for quick and easy servicing, which minimizes downtime.

In conclusion, the Nilfisk-Advance America SR 1100S is a powerful, efficient, and user-friendly scrubber that is backed by advanced technology. Its compact design, effective cleaning capabilities, and operator-friendly features make it a valuable addition to any cleaning fleet. With its commitment to sustainability and efficiency, the SR 1100S is an ideal choice for businesses aiming to maintain a clean and safe environment for employees and customers alike.
Top Page Image Contents