|
|
6 | Stacking Sections |
| |
|
|
Tools Needed: | NOTE: For door section identification |
Power Drill | see page 4. |
| |
7/16” Socket | NOTE: Make sure hinge leafs are |
Driver | flipped down, when stacking another |
| section on top. |
| Place rollers in hinge tubes of the |
| second section (lock section). |
| With assistance, lift the second section |
| and guide rollers into the vertical |
| tracks. |
| Keep sections vertically aligned and |
| fasten hinges to connect the sections |
| using 1/4”- 14 x 5/8” self tapping |
| screws. |
| Repeat for other section(s) except top |
| section. |
| IMPORTANT: End Hinges have (2) |
| screws and Intermediate hinges |
| have (3) screws. |
| NOTE: Install lock at this time (sold |
| separately). See instructions in |
| OPTIONAL SIDELOCK INSTALLATION on |
| page 27. |
LOCK SECTION
(2)
SELF TAPPING SCREWS
end hinges (left hand shown, right hinge symmetrically opposite)
(3)
INSTALLATION
intermediate hinges
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts 15 You May Need. You can reach us Toll Free at