Wayne-Dalton 9800 Operator Bracket, To this DOOR, a WAYNE-DALTON, Properly

Page 17

8

 

 

If no u-bar is installed

Operator Bracket

Operator Bracket

Operator

 

 

centered in the

Bracket

 

 

middle of top section

Aligned with

Tools Needed:

NOTE: If installing a trolley type operator,

top of section

 

Power Drill

complete this step. If not, skip this step

 

Side view

and continue with Step 9.

 

 

 

7/16” Socket

IMPORTANT: WHEN CONNECTING A

 

 

Driver

 

( 6) 1/4”-20 X 5/8”

 

TROLLEY TYPE GARAGE DOOR OPENER

 

 

 

self drilling

(2) Saw Horses

TO THIS DOOR, A WAYNE-DALTON

 

 

screws

 

OPENER/TROLLEY BRACKET MUST

 

 

 

 

 

BE SECURELY ATTACHED TO THE TOP

 

If u-bar is installed

 

SECTION OF THE DOOR, ALONG WITH

 

u-bar

 

ANY U-BARS PROVIDED WITH THE

 

 

 

 

 

DOOR. THE INSTALLATION OF THE

 

 

 

OPENER MUST BE ACCORDING TO

 

 

 

MANUFACTURER’S INSTRUCTIONS AND

 

 

 

FORCE SETTINGS MUST BE ADJUSTED

Side view of u-bar

 

 

PROPERLY.

 

 

 

 

 

NOTE: For retro fit applications, the

 

1/4”- 20 X 7/8” self

 

operator bracket must be aligned with

 

 

 

drilling screws

 

an existing operator

 

 

If no u-bar is installed:

Locate the center of the top section and attach the operator bracket as shown in the illustration using (6) 1/4” - 20 x 5/8” self drilling screws.

If u-bar is installed:

Operator

bracket

 

U-bar

Remove, but retain (4 to 6)

 

1/4”- 20 x 7/8” self drilling screws

 

from the center of the u-bar. Locate

 

the center of the top section and slide

 

operator bracket under u-bar till the

 

operator bracket is seated against the

 

u-bar flange. Attach the operator bracket

 

using (6) 1/4” - 20 x 5/8” self drilling

 

screws (as shown). Reattach the u-bar

Operator

using the self tapping screws removed

bracket

previously.

 

 

U-bar

Operator bracket

(6) 1/4”- 20 X 7/8”

in place under

self drilling

u-bar

screws

 

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts 17

You May Need. You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

INSTALLATION

Image 17
Contents Portland Source Plant SeriesTable of Contents Package Contents Door Section Identification Saw horses pair Power DrillTools Required Torsion Spring Removal For Standard Lift Spring when the set screws areFailure to use approved Experienced door technician. Instead haveUnwind Springs TorqueMaster Spring RemovalBracket and Drive Gear Removing the Old Door Extension Spring RemovalFailure to securely Preparing the OpeningAttach a suitable Mounting pad to structurally soundAttaching Fully Adjustable Flagangle to Vertical Track InstallationHand tighten the flagangle to None Carriage bolts and 2 1/4- 20 flangeInstalling Fully Adjustable Jamb Brackets Bottom Section Counterbalance CablesTools Needed Important The tops Vertical TrackSide, must be raised the height Shim Position the left hand vertical trackStacking Sections Top Brackets Operator Bracket ANY U-BARS Provided with DOOR. the InstallationTo this DOOR, a WAYNE-DALTON ProperlyDoor Operation Top SectionAdjusting Top Brackets Attaching Horizontal Track to AdjustableFlagangle Do not Raise Door Until HorizontalCenter Bearing Bracket Side Torsion Spring AssemblyNylon Center Bushing Important do not USE Impact GUN To Wind Springs Securing DoorFor Spring Winding Winding Torsion Springs Keep horizontal track Rear SupportParallel and within 3/4 Maximum of door edge Otherwise door could fall Resulting in severe injury orThird roller. Insert a winding bar into To adjust spring tension, fully closeWinding bar while carefully loosening Set screws in the winding conePull Rope Side LockHeader Door ARM to Operator Bracket Trolley OperatorPerforated OPERATORangle rail Operator Framing Members Perforated AnglePainting CleaningPainting Lifetime Limited Warranty Model Thank you for your purchase /or Ship Any Parts You May Need
Related manuals
Manual 20 pages 42.88 Kb Manual 4 pages 60.02 Kb Manual 26 pages 11.64 Kb Manual 38 pages 17.26 Kb Manual 18 pages 4.37 Kb

9800 specifications

Wayne-Dalton is a well-known brand in the garage door industry, offering a wide range of models designed for durability, performance, and aesthetic appeal. Among its most popular series are the 9700, 5000, 8000, 9000, and 9800, each equipped with unique features and advanced technologies to meet diverse customer needs.

The Wayne-Dalton 9700 series is known for its combination of strength and insulation. This garage door is manufactured with a three-layer construction providing robust protection against the elements while offering excellent energy efficiency. The insulated steel construction can help maintain interior temperatures, making it ideal for attached garages.

The 5000 series, on the other hand, is designed for a more traditional look combined with modern performance. Featuring a lightweight design, it is made from durable materials that resist rust and corrosion. The 5000 series can be customized with different colors and styles, allowing homeowners to achieve the perfect aesthetic to enhance their property.

Moving on to the 8000 series, this model is designed for commercial applications and residential use where heavy-duty functions are necessary. It is built to withstand extreme weather conditions while providing optimal security with added strength features. The 8000 series offers smooth operation and minimal maintenance requirements, making it a great choice for those seeking reliability.

The 9000 series stands out with its stylish design and sleek finishes. This series offers advanced insulation options, coupled with numerous panel designs that provide a polished and sophisticated look. The 9000 model emphasizes both aesthetics and energy efficiency, making it a favorite among homeowners looking for a beautiful yet functional garage door.

Lastly, the 9800 series is the premium option within Wayne-Dalton’s offerings. This series is characterized by its high insulation value and thermal efficiency, thanks to its innovative construction techniques. The 9800 doors can be customized with numerous panel options and colors, delivering a luxury look while ensuring excellent performance.

In conclusion, Wayne-Dalton’s 9700, 5000, 8000, 9000, and 9800 series garage doors each feature distinctive characteristics and technologies aimed at enhancing durability, security, and aesthetics. Homeowners can find a reliable option within this range that suits their specific requirements, whether they prioritize insulation, style, or heavy-duty functionality. With Wayne-Dalton’s commitment to quality and innovation, these garage doors stand out in today’s market.