Painting Continued....
2.If the finish painted steel door surface has a textured surface representing wood grain, stucco, etc., this step should not be attempted as danger of exposing substrate is greatly increased.
3.Consult a professional coatings contractor if in doubt about any of the above directions.
4.Follow directions explicitly on the paint container labels for proper applications of coatings and disposal of containers. Pay particular attention to acceptable weather and temperature conditions in which to paint.
Fiberglass garage door finishing directions.
1.It is recommended that the doors be purchased
2.If finishing is preformed, use exterior commercial grade finishing kits approved for use on fiberglass or commercially available exterior grade water based or oil based paint. The customer assumes all liability for the finishing.
3.The top coat on factory finished doors may require a
a.Clean surfaces with soap and water or wipe down with mineral spirits or Naptha. Light scuff sanding may be required using
b.Apply a commercial brand of exterior grade top coat following the manufacturer instructions.
4.To strip the existing coating from the door, use a commercial grade paint stripping products.
5.To paint over the existing paint, clean per the instructions listed above and apply any commercially available exterior grade water based or oil based paint.
30Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts
You May Need. You can reach us Toll Free at