| Side Lock | |
|
| |
Tools Needed: | Install the side lock on the second | |
Power Drill | section of the door. Secure the lock to | |
the section with (4) 1/4”- 20 x 11/16” | ||
7/16” Socket | self drilling screws. Square the lock | |
assembly with the door section and | ||
Driver | ||
align with the square hole in the vertical | ||
| ||
| track. The side lock should be spaced | |
| in approximately 1/8” from the section | |
| edge. | |
| IMPORTANT: side locks must be | |
| removed or made inoperative in | |
| the unlocked position if an | |
| operator is installed on the | |
| door. | |
| NOTE: After completing this step, | |
| continue with step 7 on page 16. | |
|
|
(4)1/4”- 20 x 11/16” self drilling screws
1/8”
|
| Pull Rope | |
|
|
|
|
Tools Needed: |
| WARNING |
|
Power Drill | DO NOT INSTALL PULL ROPES | ||
| ON DOORS WITH ELECTRIC | ||
1/8” Drill Bit | OPERATORS. CHILDREN MAY | ||
| BECOME ENTANGLED IN THE | ||
| ROPE CAUSING SEVERE OR | ||
| FATAL INJURY. | ||
| Measure and mark the jamb | ||
| approximately 48” to 50” (1220 to 1270 |
mm)from floor on the right or left side of door. Drill 1/8” pilot hole for No. 6 screw eye. Install the No. 6 screw eye. Tie the pull rope to the No. 6 screw eye and to the bottom bracket as shown.
NO. 6 SCREW EYE
PULL ROPE
BOTTOM BRACKET
PULL ROPE
optional INSTALLATION
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts | 27 |
You May Need. You can reach us Toll Free at