Sears 139.53915D To Add, Reprogram or Change a Keyless Entry PIN, To set a temporary PIN

Page 36

To Add, Reprogram or Change a Keyless Entry PIN

NOTE: Your new Keyless Entry must be programmed to operate your garage door opener.

USING THE "LEARN" BUTTONUSING THE MOTION DETECTING CONTROL CONSOLE

1.Press and release the "learn" button on motor unit. The learn indicator light will glow steadily for 30 seconds.

2.Within 30 seconds, enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold the ENTER button.

3.Release the button when the motor

unit lights

blink. It has learned the

...I

/

code. If light bulbs are not installed,

 

 

two clicks

will be heard.

 

 

To change an existing, known PIN

If the existing PIN is known, it may be changed by one person without using a ladder.

1.Press the four buttons for the present PIN, then press and hold the # button.

The opener light will blink twice. Release the # button.

2.Press the new 4-digit PIN you have chosen, then press ENTER.

The motor unit lights will blink once when the PIN has been learned.

Test by pressing the new PIN, then press ENTER. The door should move.

To set a temporary PIN

You may authorile access by visitors or service people with a temporary 4-digit PIN. After a programmed number of hours or number of accesses, this temporary PIN expires and will no longer open the door. It can be used to close the door even after it has expired. To set a temporary PIN:

1.Press the four buttons for your personal entry PIN (not the last temporary PIN), then press and hold the #= button.

The opener light will blink three times. Release the button.

NOTE: This method requires two people if the Keyless Entry is already mounted outside the garage.

1.Enter a four digit personal identification number (PIN) of your

choice on the keypad. Then press and hold ENTER.

2.While holding the ENTER button, I _ press and hold the LIGHT button on

the Motion Detecting Control Console.

3.Continue holding the ENTER and LIGHT buttons while you press the push bar on the Motion Detecting Control Console (all three buttons are held).

4.Release buttons when the motor unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.

2.Press the temporary 4-digit PIN you have chosen, then press ENTER.

The opener light will blink four times.

3.To set the number of hours this temporary PIN will work, press the number of hours (up to 255), then press _=.

OR

3.To set the number of times this temporary PIN will work, press the number of times (up to 255), then press #.

The opener light will blink once when the temporary PIN has been learned.

Test by pressing the four buttons for the temporary PIN, then press ENTER. The door should move. If the temporary PIN was set to a certain number of openings, remember that the test has used up one opening. To clear the temporary password, repeat steps 1-3, setting the number of hours or times to 0 in step 3.

One Button Close: Opener can be closed by pressing only the ENTER button if the one button close feature has been activated. This feature has been activated at the factory. To activate or deactivate this feature press and hold buttons 1

and 9 for 10 seconds. The keypad will blink twice when the one button close is active. The keypad will blink four times when one button close is deactivated.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents RRFTSMAN+I Contents IntroductionTools needed Preparing your garage doorSectional Door Installations Sectional Door InstallationPlanning ONE-PIECE Door Installations ONE-PIECE Door Without TrackONE-PIECE Door with Track Carton Inventory SECURITY,¥Assembly Hardware Installation HardwareHardware Inventory Assembly Step Assemble the Rail & Install the TrolleyInstall the Idler Pulley Fasten the Rail to the Motor UnitInstall the Belt and Attach the Belt Cap Retainer Installation Assembly StepReadand Followall Installationwarningsand Instructions DeathInstallation Step Determine the Header Bracket LocationInstall the Header Bracket Wall Header Bracket InstallationCeiling Header Bracket Installation Attach Rail to Header Bracket Position the Opener Sectional Door or ONE-PIECE Door with TrackHang the Opener Install Door Control Connecting Multiple Door controlsOpener, twist same color wires together. Insert wires into Quick-connect holes white to white and red/white to redInstall the Lights Attach the Emergency Release Rope and HandleElectrical Requirements Install The Protector System Important Information about the Safety Reversing SensorInstalling the Brackets Garage door track installation preferredWall installation Floor installation FigureMounting and Wiring the Safety Reversing Sensors Aligning the Safety Reversing SensorsTroubleshooting the Safety Reversing SensorsWill not need the door bracket proceed to Installation Step Fasten the Door BracketSectional Doors ONE-PIECEDOORS Connect Door Arm to Trolley Sectional Doors onlyAdjustment procedures, Figure ALL ONE-PIECE DoorsAssemble the door arm, Figure Connect the door arm to the trolleyAdjustment Step Adjust the UP and Down Travel LimitsIf door does not open at least 5 feet 1.5 m If the door does not close completelyAdjust the Force HOW and When to Adjust the ForcesTest the Down close force Test the UP open forceTest the Safety Reversal System AdjustImportant Safety Check Test The Protector SystemUsing Your Garage Door Opener OperationReadand Followall Warningsand Instructions Activate your opener with any of the followingUsing the Wall.Mounted Door Control FeatureTo Open the Door Manually Motion Detecting ControlLimit and Force Adjustments Maintenance ScheduleRemote Control Battery Care of Your OpenerHaving a PROBLEM? Refer to Adjustment , Adjust the ForceSymptom LED is not fit on door control Symptom Motor unit doesnt operateTo Add or Reprogram Hand.held Remote Control ProgrammingTo Erase All Codes From Motor Function Remotes Unit Memory To Add, Reprogram or Change a Keyless Entry PIN To change an existing, known PINTo set a temporary PIN Repair Parts Rail Assembly PartsInstallation Parts KEY Part NO. noMotor Unit Assembly Parts DescriptionAccessories WarrantyParts & Service Available Only Through SearsContenido Preparaci6n de la puerta de su cochera Herramientas necesariasPlanificaci6n Instalacion CON UNA Puerta SeccionalPlanificaci6n continba Instalacion CON Puertas DE UNA Sola PiezaPuerta DE UNA Sola Pieza SIN Carril Puerta DE UNA Pieza CON CarrilInventario de la caja de cart6n SECURITY.,IInventario de piezas Tornillera Y Piezas Para EL MontajeTornillera Y Piezas Para LA Instalacion MONTAJE, Paso Monte el riel e instale el troleFije el riel a la unidad del motor Instale la polea IocaInstale la banda y sujete el retn de la Cubierta de la banda Instalacion Fije la tensibn de la bandaYa termino de armar su abridor de puerta de cochera. Lea INSTALACION, Paso Determine dbnde va a instalar la m6nsula Del cabezalInstale la m6nsula del cabezal Instalacion DE LA Mensula DEL Cabezal EN EL Cielo RasoColoque el riel en la m6nsula del cabezal Coloque el abridor en posici6n Puerta DE UNA Sola Pieza SIN CarrilCuelgue el abridor No se incluyenInstalacion Paso Instale Unidad Control PuertaIiiiiiiiiiiiiiiiiiii Instale las luces Coloque la manija y la cuerda De emergenciaRequisitos para la instalaci6n el6ctrica Cableado PermanenteDelsco, 6 u,g o, ,so Instale la Sistema de Protecci6nInstalacion DE LAS M#NSULAS Inetalacion en la pared Figura 2 yInstalacion en el pieo Figura Como Alinear LOS Sensores DE Seguridad DE Reversa Fije la mnsula de la puerta Puertas SeccionalesPuertas DE UNA Sola Pieza Conecte el brazo de la puerta al trole Solo Para Puertas SeccionalesTodas LAS Puertas DE UNA Sola Pieza Arme el brazo de la puerta, FiguraAJUSTES, Paso Ajuste el limite del recorrido Hacia Arriba y Hacia AbajoComo Y Cuando Ajustar LOS Lmites Ajuste la fuerza Pruebe la fuerza del recorrido HAClA Abajo cerrarPruebe la Sistema de Protecci6n Pruebe el sistema de retroceso de seguridadPrueba Conserveestasinstrucciones OperacionC6mo Usar su Abridor de Puerta de Cochera Active su abridor de alguna de las siguientes manerasC6mo usar la unidad de control de pared C6mo abrir la puerta manualmenteLA Consola DE Control DE Deteccion DE Movienmento Como Desconectar EL TroleMantenimiento DE SU Abridor DE Puerta DE Cochera LA Bateria DEL Control Remoto Ajustes DE Limite Y FuerzaCalendario DE Mantenimiento Una vez al ruesSI Tiene Algon Problema El control remoto no activa la puertaSfntoma Una o ambas De los SensoresDe reversa no El circuito de los sensoresComo Programar EL Abridor C6mo agregar o reprogramar Un control remoto ManualControles remotos de 3 funciones C6mo Agregar, reprogramar Un c6digo de entrada Sin IlaveGarantja AccesoriosSolo estan disponibles a traves de Refacciones Servicio SearsYour Home

139.53915D specifications

The Sears 139.53915D is a significant addition to the lineup of garage door openers, blending both functionality and modern technology to enhance user convenience. This model is designed to accommodate residential garage doors, forming a reliable solution for homeowners who prioritize safety, security, and ease of use.

One of the standout features of the 139.53915D is its powerful motor, capable of handling heavy garage doors with ease. With its 1/2 horsepower motor, it ensures a smooth and swift opening and closing mechanism, allowing for quick access while still maintaining durability. This strength is particularly beneficial for larger or heavier doors that require more power for reliable operation.

The opener utilizes a chain drive system, renowned for its durability and strength. Chain drive systems are highly effective in providing reliable performance, making them a popular choice for various households. Despite this robust mechanism, the opener remains relatively quiet during operation, minimizing disruptions in the home environment.

A key characteristic of the Sears 139.53915D is its security features. It is equipped with rolling code technology, which generates a new code every time the remote control is used. This significantly enhances security by preventing unauthorized access and ensuring that only designated users can operate the garage door.

Additionally, the model features a safety reverse system, which automatically reverses the door's direction if it encounters an obstruction while closing. This not only protects vehicles and other possessions but also safeguards pets and children—an essential component for family households.

Installation of the Sears 139.53915D is designed to be straightforward, with comprehensive instructions that facilitate an efficient setup process. For those who prefer a seamless experience, the opener is compatible with several accessories, including smart home technologies. This compatibility allows users to integrate their garage door opener into a broader home automation system, providing added convenience and control through smartphone apps or smart devices.

In summary, the Sears 139.53915D garage door opener is a robust, reliable choice for homeowners seeking an efficient and secure opening mechanism. Its combination of a powerful motor, durable chain drive system, advanced security features, and ease of installation make it a formidable option in the market for garage door solutions.
Top Page Image Contents