Mounting Machine to No Folding Wheel Stand

1822-I Pipe and Bolt Threading Machine

Mounting Machine to No. 1406 Folding Wheel Stand

1.Raise rear handle of stand to a vertical position and tighten mounting bolts.

2.Using hand crank, raise stand to its operating height. Place machine on stand with carriage away from wheels (Figure 4). Insert four 1/4″ – 20 bolts through rails into machine base. Tighten bolts.

Installing No. 1460 Oil Pan Cover

NOTE! No. 1460 Oil Pan Cover installs in machine oil reservoir and prevents oil spill during transporta- tion. No. 1460 is shipped with No. 1406 Folding Wheel Stand and is available as an accessory.

1.With oil reservoir drained, disconnect filter and oil line.

2.Attach elbow fitting and oil line extension to existing oil line (Figure 5A).

3.Reattach oil line to filter and the filter to reservoir base.

4.Install oil pan cover with oil line positioned as in Figure 5B.

5.Set chip pan in place and machine is ready for trans- port.

NOTE! Chip pan will not lock into position. This is a re- minder that the oil pan cover is installed.

Line Extension

Oil Filter

Elbow Fitting

Figure 5A – No. 1460 Oil Pan Cover

Push	Rear Latch

Oil Line

Notch

Oil Pan
Cover	Front Latch

Figure 5B – No. 1460 Oil Pan Cover

Mounting Machine To Bench

1.If a stand is not used, the machine should be mounted to a stable bench. To mount the unit on a bench, use four (4) 5/16″ bolts in holes provided at each corner of machine base. Base dimensions are shown in Figure 2.

WARNING Failure to mount the threading machine to a stable stand or bench may result in tipping and serious injury.

Transporting Machine with

No. 1406 Stand

1.Install 1460 Oil Pan Cover to prevent oil spillage.

2.For ease of transporting, turn hand crank counter- clockwise and fold stand into a compact package.

3.Lift handles (front and rear) and skid bars are provided for transportation on stairways, over rough terrain and in and out of trucks, vans and station wagons.

WARNING Use two persons on stairs.

4.The front handle is for control on stairs and wheel- barrow like operation.

5.The rear handle is for an assist on stairs, lifting in and out of vehicles and movement over flat surfaces in the operational position.

Transporting Machine with a Tow Motor, Material Lift or Crane

1.Place tow motor forks below base of machine and above cabinet or tray.

2.Loop a sling over a 2″ piece of pipe as shown in Figure 6 and lift machine with a lift or crane.

3.Place a sling around machine and top stand rails and lift machine with a material lift or crane.

Ridge Tool Company

1822-I specifications

The RIDGID 1822-I is a powerful and versatile compact pipe threading machine that is widely recognized for its reliability and innovative design. This electric threading machine is specifically engineered for both professional and DIY users, ensuring high productivity in pipe fitting and fabrication tasks.

At the core of its engineering, the RIDGID 1822-I features a robust motor that delivers high torque, allowing for efficient threading of a variety of pipe sizes up to 2 inches in diameter. This machine is equipped with a quick-release pipe clamp that securely holds the workpiece in place, providing enhanced stability and safety during operations. The user-friendly controls enable seamless operation with minimal setup time, making it an ideal choice for contractors and plumbing professionals.

One of the standout technologies integrated into the RIDGID 1822-I is its automatic shut-off feature that enhances safety while prolonging the lifespan of the machine. It also boasts an adjustable threading stop, allowing operators to maintain consistent thread lengths and ensuring precision in their work. This machine is compact in design, enabling easy portability and storage, which is especially beneficial for jobs in confined spaces or on construction sites.

The RIDGID 1822-I is constructed using durable materials and comes with a sturdy frame that minimizes vibration, significantly reducing user fatigue during extended use. Additionally, it features an integrated oil reservoir that simplifies the process of threading pipes, ensuring proper lubrication and ensuring smoother cuts.

Another characteristic that sets the RIDGID 1822-I apart is its versatility. It is compatible with various RIDGID threading dies and accessories, allowing for customization based on the specific requirements of each job. Furthermore, the machine's exceptional threading speed leads to increased efficiency, enabling users to complete projects more quickly without compromising on quality.

In conclusion, the RIDGID 1822-I is an indispensable tool for professionals looking for a reliable, efficient, and versatile pipe threading solution. Its combination of advanced features, durability, and user-friendly design make it a top choice for those in the plumbing and construction industries, as well as for DIY enthusiasts seeking a dependable machine for their pipe threading needs. With the RIDGID 1822-I, users can achieve high-quality results with ease and confidence.