Machine Inspection, Sling Transportation

1822-I Pipe and Bolt Threading Machine

CAUTION DO NOT use a sling through the spindle tube

only.

Figure 6 – Sling Transportation

Machine Inspection

WARNING

To prevent serious injury, inspect your Threading Machine. The following inspection procedures should be performed on a daily basis:

1.Make sure threading machine is unplugged and the control switch is set to the OFF position (Figure 7).

2.Clean the chuck jaws with a wire brush.

3.Inspect the jaws for excessive wear or damaged teeth. Refer to the Maintenance Instructions if they need to be replaced.

4.Make sure the foot switch is present and attached to the Threading Machine (Figure 7).

WARNING Do not operate the Threading Machine without a foot switch.

5.Inspect the power cord and plug for damage. If the plug has been modified, is missing the grounding pin, or if the cord is damaged, do not use the Thread- ing Machine until the cord has been replaced.

RIDGID Center-Lock Chuck

Rear Centering/Front Gripping

No. 364 Cutter

Front Cover

No. 344

Reamer

Rear Cover

Top Cover

Self-Opening

Die Head

Control	Chip Pan
Switch

Transmission

Lever

Drain Plug

Handwheel

Foot Switch

Figure 7 – 1822-I Threading Machine

6.Inspect the Threading Machine for any broken, miss- ing, misaligned or binding parts as well as any other conditions which may affect the safe and normal op- eration of the machine. If any of these conditions are present, do not use the Threading Machine until any problem has been repaired.

7.Lubricate the Threading Machine if necessary ac- cording to the Maintenance Instructions.

8.Use tools and accessories that are designed for your Threading Machine and meet the needs of your ap- plication. The correct tools and accessories allow you to do the job successfully and safely. Accessories designed for use with other equipment may be haz- ardous when used with this Threading Machine.

9.Clean any oil, grease or dirt from all handles and con- trols. This reduces the risk of injury due to a tool or control slipping from your grip.

10.Inspect the cutting edges of your tools and dies. If necessary, have them replaced prior to using the Threading Machine. Dull or damaged cutting tools and dies can lead to binding, tool breakage and poor quality threads.

8	Ridge Tool Company

1822-I specifications

The RIDGID 1822-I is a powerful and versatile compact pipe threading machine that is widely recognized for its reliability and innovative design. This electric threading machine is specifically engineered for both professional and DIY users, ensuring high productivity in pipe fitting and fabrication tasks.

At the core of its engineering, the RIDGID 1822-I features a robust motor that delivers high torque, allowing for efficient threading of a variety of pipe sizes up to 2 inches in diameter. This machine is equipped with a quick-release pipe clamp that securely holds the workpiece in place, providing enhanced stability and safety during operations. The user-friendly controls enable seamless operation with minimal setup time, making it an ideal choice for contractors and plumbing professionals.

One of the standout technologies integrated into the RIDGID 1822-I is its automatic shut-off feature that enhances safety while prolonging the lifespan of the machine. It also boasts an adjustable threading stop, allowing operators to maintain consistent thread lengths and ensuring precision in their work. This machine is compact in design, enabling easy portability and storage, which is especially beneficial for jobs in confined spaces or on construction sites.

The RIDGID 1822-I is constructed using durable materials and comes with a sturdy frame that minimizes vibration, significantly reducing user fatigue during extended use. Additionally, it features an integrated oil reservoir that simplifies the process of threading pipes, ensuring proper lubrication and ensuring smoother cuts.

Another characteristic that sets the RIDGID 1822-I apart is its versatility. It is compatible with various RIDGID threading dies and accessories, allowing for customization based on the specific requirements of each job. Furthermore, the machine's exceptional threading speed leads to increased efficiency, enabling users to complete projects more quickly without compromising on quality.

In conclusion, the RIDGID 1822-I is an indispensable tool for professionals looking for a reliable, efficient, and versatile pipe threading solution. Its combination of advanced features, durability, and user-friendly design make it a top choice for those in the plumbing and construction industries, as well as for DIY enthusiasts seeking a dependable machine for their pipe threading needs. With the RIDGID 1822-I, users can achieve high-quality results with ease and confidence.