Kenmore Sewing Machine manual Accessory Storage Box, Change the Presser Foot

!

I b

	d	Needle clamp screw
Flat	"~ -_j
side

away from

You

•Accessory Storage Box

The lid of the accessory storagebox lifts

open toward you.

Sewing accessories are conveniently located in the box.

• Free-Arm Sewing: the Removable Extension Table

To Remove the Extension Table

(for free-arm sewing)

1.Grip the table with your index finger and thumb, as shown.

To Attach the Extension Table (for flat-bed sewing)

1.Insert the tab and the pin into their catches.

2.With your thumb and index finger, gently snap in.

J

•Change the Presser Foot

Use the correct presser foot for the stitch you wish to sew.

To change presser feet, raise the presser bar to its highest position by lifting the presser

foot lever.

screw, choose the proper foot, insert from the bottom.

Tighten the screw using the large screw driver to make certain the foot is secure.

Choose the Needle and Thread

• To Change the Needle

NOTE: Raise the needle bar to its highest position by turning the hand wheel toward you.

1. Loosen the needle clamp screw by turning it

3.Insert the new needle into the needle clamp wi_ the flat side away from you.

4.Push the needle up as far as it will go.

5.Tighten the needle clamp screw firmly with the large screwdriver from the accessory box.