Kenmore 385.162213 owner manual Topstitching, Quilting

Topstitching

_)	Stitch	selector:		4 to 6
	Stitch	width:		65
®	Stitch	length:		Red zone
	Needle		thread tension:	2 to 6
	Presser		foot A:	Zigzag	foot
	Presser		foot H:	Straight	foot

NOTE:

When using the straight stitch foot, make sure to use the center needle position, otherwise the needle may strike the presser foot and possibly break.

Topstitching emphasizes lines of garments and keeps seams and edges flat and crisp Accent suits or blouses with one or two rows of topstitching around the outer edges of cuffs, lapels or collars Lower the presser foot and keep

the edge of the fabric next to the right edge of the presser foot

Evenly guide the fabric along the edge to produce an even row of topstitching 3/8" (10 cm) from the edge_

f	(b		_l_	WrOtH
		(		®}®
I	1
I	I 4I	(		1®

®®®

%or%ouO

J

f

Quilting

(_	Stitch	selector:		4 to 6
_)	Stitch	width:		6,5
(_	Stitch length:			Red zone
	Needle		thread tension:	2 to 6
	Presser		foot A:	Zigzag	foot
	Presser		foot H:	Straight	foot
	NOTE:

When using the straight stitch foot, make sure to use the center needle position, otherwise the needle may strike the presser foot and possibly break.

Use the seam guide lines on the needle plate, and the free- arm, to help determine the distance between quilting stitches, The quilter will help keep the stitching line straight [] Loosen the quilter holding screw,

Slide the quilter in the hole to the desired width and tighten the screw

[] Sew, guiding the quilter over the previous row of stitching.

Quilter holding screw (_) Quilter

(_) Hole

(_) Distance

f

f

®_

I	I	I	,,,
I	I	I

®®®

J

4O