Southwing SH505 manual Wearing the Headset without the Ear Hook, General Usage

Headset is paired with more than one device, it will connect to the last con- nected device. Should you desire to connect it to another paired device, first disconnect the active device, then initiate connection from the device. If you pair with more than 3 devices, you will lose pairing information with the first device that you paired your Headset to.

3.WEARING AND CARRYING THE HEADSET

You can wear your Headset on either ear and carry it in different ways using the rotating Multi-function Arm [8].

Wearing the Headset without the Ear Hook

You can wear the Headset without using the Ear Hook. To do so:

1.Rotate the Multi-function Arm [8] downwards, until it stays in your ear like a wired headset cable extension

2.Gently place the Speaker [6] into your ear canal

3.Finally find the most comfortable position by rotating the Headset for- ward and backward

4.To switch from one ear to the other, simply rotate the Multi-function Arm [8] downwards and rotate the Ear Hook [9] to the opposite side

Clipping your Headset to your clothes

The Multi-function Arm can also be used to carry your Headset in several convenient ways (Ear Hook not mounted). To clip it to your clothes do the following:

1.Rotate the Multi-function Arm [8] to the same direction of the microphone [7]

2.Use the Multi-function Arm [8] and Headset Body as a clip to attach the Headset to your clothes

Using your Headset Cord to carry your Headset

The Headset Cord [10] can also be used to carry your Headset (Ear Hook not mounted). To attach your Headset to the Headset Cord [10] follow these steps:

1.Rotate the Multi-function Arm [8] until it is in opposite direction of the Headset microphone [7]

2.Attach the Multi-function Arm [8] to the Headset Cord [10] jack

Wearing the Headset with the Ear Hook

The Ear Hook may also be used for maximum comfort. To mount the ear hook, rotate the Multi-function Arm [8] upwards and slide it inside the Ear Hook [9] jack. To place it on your ear follow these steps:

1.Rotate the Ear Hook [9] slightly for- wards

2.Gently place the Speaker [6] slightly into your ear canal

3.Rotate the Ear Hook [9] backwards and adjust it behind your ear

4. GENERAL USAGE

Turning the Headset on and off

To turn the Headset on, press and hold the On/Off Button [3] for about 2 sec- onds until a series of tones is heard. The Indicator Light [2] will flicker green for 1 second and start flashing every 2 seconds if the headset is connected, if not, every 4 seconds.

To turn the Headset off, press and hold the On/Off Button [3] for about 2 sec- onds until a series of tones is heard. The Indicator Light will flash red,

4

*The features marked with an asterisk will only work with Bluetooth phones which support the Hands-free profile. Today, most Bluetooth phones support this profile.